Product Details
Eco Friendly FFP2 Disposable Mask , Personal Safety Valved Dust
Mask
Fitting Instructions
1.Cup the respirator in your hand with the nose piece at your
finger-tips allowing the headbands to hang freely below your hand.
2.Position the respirator under your chin with the nose piece up.
3.Pull the top strap over your hand resting it high at the top back
of your head, Pull the bottom strap over your head and position it
around the neck below the ears. Make sure straps are not twisted.
4.Place the fingertips of two hands at the top of the nose piece.
Mould the nose piece to the shape of your nose.
5.over the front of the respirator with both hands, sharply exhale
and inhale, if air leaks around the nose, readjust the nose clip as
described in Step 4, if air leaks at the respirator edges, work the
straps back along the sides if the head to eliminate leakage.
Repeat the procedure until the respirator fits properly.
Note:
Do not wear with beards or other facial hair that may inhibit
contact between the face and the edge of the respirator.
Sample Policy:
1. Sample according to your design drawing. Sampling time:3-5days .
2. Design your own sample, then remake it .
3. Existing Samples Sampling time:1day.
4. Make mass production after your confirm the sample.
dust mask/anti dust mask/breathing dust mask/daily dust
mask/disposable dust mask/filtered dust mask/full face dust
mask/mining dust mask/FFP1 dust mask/FFP2 dust mask/FFP3 dust
mask/N95 dust mask/respirator
1 . Descriptions
Cup Mask use adjustable aluminum nose clip so it makes wearing more
sealless leakage ,use latex-free elastic strap , soft nose liner so
it make softer and fit the face .And use easy-breathing valve then
it makes breathing more smooth .
Product Name | Respirator mask |
Material | Non woven fabric |
Type | Earloop |
Style | With valve or without valve |
Application | Construction, mining,textile |
Feature | Nose bar adaptable,hypoallergenic |
FFP2 without valve | FFP2 with valve |
| |
Packing: |
Box (pcs) | CTN(boxes) | Dimension(cm/ctn) | GW/NW |
20 | 20 | 54*44*25 | 6/5 |
2 . Material of each layer
Outer layer : Protective needle punched cotton
Middle layde : FFP2 melt blown filter(have filter efficiency level
of 94%)
Inner layer : Shaped needle punched cotton
3. Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
4 . Expiry date
If maintained as per storage instructions , products can be used up
to 5 years from date of manufacture.
5. Advantages
1. FFP2 dust mask has a better design
2. Dual fixed straps, adjustable metal nose band
3. Smooth inner lining ensuring a secure seal.
4. Loaded polypropylene material without any toxic, irritating,
stimulant, poison
5. High filtration and static electricity material to resist normal
toxic and ting micron particle.
Company Profile
HUBEI SAFETY PROTECTIVE PRODUCTS CO.,LTD (Wuhan Branch) is one of leading manufacturer and exporter of personal protection
equipments and medical consumables for more 10 years.
Our company specializes in personal protection equipments and
medical consumables as below:
Disposable Medical Gowns
Disposable Surgical Drapes
Disposable Medical Mask
Disposable Head Cap
Dilation Balloon Catheter
Waterproof Cast Cover
Pain Relief Patches
Meantime, we can also provide the sourcing and developing services
as per customer’s requirements.Our products are widely used in a
wide range of applications like Clinical, Hospital, Dental, Lab,
Paramedic, Nursing Homes , Medicine, Industrial, Food and Safety .
"First Quality, Reliable Service, Fast Delivery Time, Competitive
Price" is our principle.Our goal is to meet the expectations of our
customers in terms of products, quality, prices, delivery times
,development,sourcing and services. We have won a high reputation
among our customers from all over the world.