315mm Length Carbon Steel Material Conveyor Carrying Idler Roller
Brand Name:JINRUI
Certification:ISO/CE
Model Number:89mm
Minimum Order Quantity:20 SET
Delivery Time:10-15 working days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Location:
Xinxiang Henan China
Address:
No.388 Heping Road, Xinxiang City, Henan Province,China
Supplier`s last login times:
within 27 hours
Product Details
Company Profile
Product Details
315mm Length Carbon Steel Material Conveyor Carrying Idler Roller
1. Use environment and working conditions
Conveyor Carrying Idler Rollers are widely used in open-air dusty and corrosive environment, such as mines, power plants, steel plants, stone plants, cement plants, coal washing plants, salt plants, alkali plants, chemical fertilizer plants, docks and other transportation places often use grooved rollers.
2. Product characteristics
2.1. Carrying Roller Idler have corrosion resistance: acid, alkali and salt are difficult to
corrode.
2.2,Strong hardness of Carrying Roller Idler: strong abrasion
resistance.
2.3. Good sealing: the Carrying Roller Idler are fully sealed and
equipped with plastic labyrinth seals at both ends, so that the oil
and grease will not leak, which can make the rolling shaft run for
a long time; the slotted rollers are in a fully sealed state.
2.4. Ceramic surface of Carrying Roller Idler: forming oxide film,
smooth surface, not adhering to materials, small friction
coefficient in contact with conveyor belt, reducing the winch
driving force.
2.5. Long service life of Carrying Roller Idler: slotted rollers
last 2-5 times longer than steel rollers, and can reduce belt wear
and tear, the belt does not run edge, prolonging belt service life.
2.6,Low operating cost: Carrying Roller Idler can reduce the
comprehensive cost of belt conveyor and reduce the maintenance
time.
3. More attention:
3.1. During the installation, pay attention to the assembly
dimensions of all parts of the fuselage and keep the straightness
of the whole machine.
3.2. Tighten bolts when installing bolt fasteners.
3.3. The center line of the belt at both ends shall be aligned when
making the belt joint to prevent the belt from running off.
3.4 When installing the protection part of the electric appliance,
be careful to prevent damage.
4. Packing Details:
4.1, Outer packing is plywood case, which is up to the
international standards.
4.2, Inner packing is Moisture-proof and water-proof membrane.
4.3, All of package are wrapped by 0.5mm steel belt to further strengthen.
5. Maintenance and repair
5.1 under normal conditions, the conveyor is required to start
without load and avoid short-time starting.
5.2 it is necessary to check whether there is oil leakage in the
reducer regularly, and whether the regular oil filling volume is in
conformity with the construction in time
Correct and supplement.
5.3 if there is squeal at the driving drum, it means that the belt
is slipping. Check whether the belt is tensioned.
5.4 the belt joint shall be inspected frequently, and the damaged
parts shall be cut and redone in time, and the damaged parts shall
be protected during redoing
6. Tech data
| Belt width(mm) | Roller | Bearing NO. | |
| 800 | D | L | |
| 1000 | 89 | 315 | 204,205 |
| 1200 | 108 | 380 | 204,205,305 |
| 1400 | 133 | 465 | 205,305,206,306 |
| 1600 | 133 | 530 | 205,305,206,306 |
| 1800 | 159 | 600 | 205,306,307,308,309 |
| 2000 | 159 | 670 | 207,309,308 |
| 2200 | 194 | 800 | 207,307,308,309 |
| 2400 | 194 | 900 | 206,307,308,309 |
315mm Length Carbon Steel Material Conveyor Carrying Idler Roller
Inquiry Cart
0