Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater
Brand Name:JINRUI
Certification:ISO/CE
Model Number:108mm
Minimum Order Quantity:20 SET
Delivery Time:10-15 working days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Location:
Xinxiang Henan China
Address:
No.388 Heping Road, Xinxiang City, Henan Province,China
Supplier`s last login times:
within 27 hours
Product Details
Company Profile
Product Details
Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater
| Belt width(mm) | Roller | Bearing NO. | |
| 800 | D | L | |
| 1000 | 89 | 315 | 204,205 |
| 1200 | 108 | 380 | 204,205,305 |
| 1400 | 133 | 465 | 205,305,206,306 |
| 1600 | 133 | 530 | 205,305,206,306 |
| 1800 | 159 | 600 | 205,306,307,308,309 |
| 2000 | 159 | 670 | 207,309,308 |
| 2200 | 194 | 800 | 207,307,308,309 |
| 2400 | 194 | 900 | 206,307,308,309 |
1. Advantages and Features
The buffer roller is used for the belt conveyor to reduce the impact of the falling material on the conveyor belt. It is mainly developed for the corrosive environment of coal washing plants, coking plants, and chemical plants. Its inherent toughness is ordinary It is more than 10 times that of metal, and has a life span of five times that of traditional pillar shoes. It is corrosion-resistant, flame-retardant, anti-static, and light in weight. It is widely used in mining. The special polymer material for the roller body has mechanical properties similar to bronze, has good wear resistance, and has good self-lubricating properties, and does not damage the belt. The buffer roller has superior anti-corrosion performance. The roller body and the seal are made of polymer materials, which are corrosion resistant. Used in corrosive occasions, the service life can reach more than 5 times that of ordinary rollers.
2. Main function and scope of application
The buffer roller is light in weight and has low rotational inertia. The special polymer material for rollers is light in weight, and its specific gravity is one-seventh of steel. The weight of rollers made of this material is about one-half of ordinary rollers, with low rotational inertia, between the rollers and the belt. The friction is small. The buffer roller is installed below the receiving section of the conveyor to reduce the impact of the material on the conveyor belt during material blanking, so as to extend the service life of the conveyor belt. The spacing of the buffer rollers is generally 100-600 mm.
3. More attention:
3.1. During the installation, pay attention to the assembly
dimensions of all parts of the fuselage and keep the straightness
of the whole machine.
3.2. Tighten bolts when installing bolt fasteners.
3.3. The center line of the belt at both ends shall be aligned when
making the belt joint to prevent the belt from running off.
3.4 When installing the protection part of the electric appliance,
be careful to prevent damage.
4. Packing Details:
4.1, Outer packing is plywood case, which is up to the
international standards.
4.2, Inner packing is Moisture-proof and water-proof membrane.
4.3, All of package are wrapped by 0.5mm steel belt to further
strengthen.5. Maintenance and repair
5.1 under normal conditions, the conveyor is required to start
without load and avoid short-time starting.
5.2 it is necessary to check whether there is oil leakage in the
reducer regularly, and whether the regular oil filling volume is in
conformity with the construction in time
Correct and supplement.
5.3 if there is squeal at the driving drum, it means that the belt
is slipping. Check whether the belt is tensioned.
5.4 the belt joint shall be inspected frequently, and the damaged
parts shall be cut and redone in time, and the damaged parts shall
be protected during redoing
Rubber Material Buffer Roller Conveyor Spare Parts Trough Model 108mm Diamater
Inquiry Cart
0