Powder Small Vibrating Screen Multi Layer Design Double Motor
Driven Eco Friendly
1. Brief Introduction
linear vibrating screen sieve is a high precision fine powder
screening machine.The fundamental principle of vibrating screen
sifter is that the unbalanced weight dropper installed on the top
and bottom ends of motor changes the rotation motion of motor to
horizontal, vertical and inclined three-dimensional motions, and
then passes this motion to screen surface, achieving the purpose of
classification, filtering and removal of impurities. Pineapple
block linear vibrating screen sieve can be used for grain, powder,
granule, flake, liquid materials.
2. Applications
1. Food industry
This linear vibrating screen can be used for handling starch
powder, sugar powder, salt, rice flour, milk powder, soy bean milk,
sauce, fruit juice, condiment, and so on.
2. Chemical industry
Our high efficiency screener is widely used for processing resin
powder, paint, industrial chemicals, detergent powder, cosmetic,
Chinese medicine powder.
3. Metallurgy industry
In metal processing industry, this linear vibrating screen can sift
alluminium powder, lead powder, copper powder, alloy metal powder,
electrode powder, manganese dioxide powder, electrolytic copper
powder, abrasive powder, High temperature resistant material,
kaolin, limestone, dolomite, alumina, calcium carbonate, quartz
sand and so on.
4. Pollution abatement
Our linear vibrating screen is also suitable for treating waste
oil, age, accessory ingredient, activated carbon.
3. Driving Device Classification
-Dual Vibration motor driving
-Vibration exciter driving(for large model screen)
4. Characteristics
The linear vibrating screen is composed of screen box, screen
frame, vibration motor, shock absorber and machine base. The two
same vibration motors, as the vibration providers, are fiexed on
the top of screen box. They rotate synchronically in reverse
directions.
The eccentric blocks driven by the motors could provide centrifugal
force, whose component force moves back and forth along the casting
direction. Thus the screen device supported by the shock absorbers
can move linearly. And the material on it moves forward straightly
when tossed upward. When falls into the screen frame again, the
material will move forward quickly and penetrate the screen in a
fluffy state. Desirable screening performance can be achieved
simply by choosing suitable screens for the linear vibrating
screen.
5.Matters needing attention
1. Once the machine on operation, the vibration part shall not be
connected or contact with any object.
2. When feeding materials, pay attention to ensure the uniform
feeding.
3. When the material through down, keeping no big impact to damage
the screen.
4. Before operation and power off, there should no be any material
on screen surface.
5. If there is any abnormal sound in the operation, the machine
should be shutdown immediately and to check.
6. Ensure vibration motor maintenance regularly.
Tech Data
Model | Screen Surface Size | Screen Cloth Aperture | Capacity | Vibration Frequency | Power | Screen Surface Inclination |
(mm) | (mesh) | (t/h) | (r/min) | (kw) | (degree) |
ZS-520 | 500*2000 | 2-325 mesh | ≤ 5 | 1460/960 | 0.4*2 | 0-10° |
ZS-525 | 500*2500 | ≤ 8 | 0.55*2 |
ZS-1020 | 1000*2000 | ≤ 12 | 1.1*2 |
ZS-1025 | 1000*2500 | ≤ 16 | 1.1*2 |
ZS-1030 | 1000*3000 | ≤ 20 | 1.5*2 |
ZS-1224 | 1200*2400 | ≤ 23 | 1.5*2 |
ZS-1525 | 1500*2500 | ≤ 28 | 2.2*2 |
ZS-1530 | 1500*3000 | ≤ 32 | 2.2*2 |
How to get one set of linear vibrating screen separator? Only by
telling us the following information for selection:
1. Material’s name, bulk density, and water content
2. Capacity you required___kg/h
3. What’s the purpose for our machine? Filtering, removing
impurities or classification?
4. How many layers do you need?
5. The mesh size for each layer
6. Voltage and frequency