Product Details
60 Degree Sidewall Cleated Power Belt Conveyor With Rubber Belt
Working Principles of Power Belt Conveyor
Power Belt Conveyor is mainly composed of head transmission device, tail tension device
and conveyor belt. The traction component and load-bearing
component are a endless belt, which is wound on the transmission
drum and steering drum at both ends of the frame. There is a
tensioning device at the tail for tensioning, and it is supported
by idler along the length of the belt to form a closed loop. When
the driving device drives the driving drum to rotate, the friction
between the driving drum and the belt drives the belt to run. The
transported materials are generally added to the belt by the guide
groove, and the materials are transported to the discharge device
of the head for discharge with the movement of the belt.
Application Scope of Power Belt Conveyor
Power Belt Conveyor is continuous transporting equipment for loose bulk materials such
as coke, coal, limestone, sand and gravel. Inclined Cleated belt
conveyor adopts high quality conveyor belt with corrugated sidewall
and horizontal baffle. Sidewall belts are used to convey material
up inclines. The sidewall increases the carrying capacity of the
belt and prevents product from falling off the edges of the belt.
Hot vulcanization provides 5 times greater adhesion between the
belt and sidewall, eliminating the need for bolting the sidewall to
the base belt. Greater adhesion also prevents the sidewall from
lifting and separating from the base belt, extending the belt life.
Highlight advantages of Power Belt Conveyor
The structure is simple, and the main parts can be used with the
general conveyor belt, which is convenient for use and maintenance
The conveyor belt with corrugated rib and diaphragm plate can reach
90 ° conveying angle.
Large conveying capacity. Because the conveyor belt has corrugated
rib, its loading end face increases, and the conveying capacity is
larger than that of general belt conveyor at the same inclination
angle
The operation is stable and reliable, its reliability is almost
equal to that of general belt conveyor, and the noise is low. As
the conveying parts move on the roller, the noise can be ignored
Low energy consumption. Due to the absence of digging resistance
during loading and internal and external friction resistance of
materials during operation, the total installed power is
significantly reduced compared with other conveying equipment with
the same conveying capacity
Technical parameters for reference of Power Belt Conveyor
Belt width (mm) | Cleat height (mm) | Handling capacity (m3/h) | Belt speed (m/s) | Inclination arrange (°) |
500 | 80 | 11-84 | 0.8-2.5 | 30-90 |
100 |
120 |
650 | 100 | 23-180 |
120 |
160 |
800 | 120 | 36-280 |
160 |
200 |
1000 | 160 | 45-500 |
200 |
240 |
1200 | 200 | 57-800 |
240 |
300 |
Operation regulation and maintenance of Power Belt Conveyor
- Belt conveyor should be operated in according to design
requirement.
Belt conveyors are not allowed to overload run.
Check wear condition of the belt, the damaged should be repaired.
Operators should circuit to inspect to close observe belt conveyor
running. Especially,temperature rise and noise of main motor and
the brake working whether they are normal; contact state of the
brake and oil level, noise of gear unit and run off of belt should
be noticed;temperature rise and noise of all bearings and state of
all transition loads point should be noticed;
notice to see whether the hopper are blocked, working state of
pulley, idler, belt cleaner, take-ups and control equipment.
Operators should make good record if any abnormal. The belt
conveyor should be stoppe on emergency.
Periodic overall: Minor overall should be once every monthes
besides ordinary maintenance Overhaul should be once half past year
or once every year.
Company Profile
Xinxiang Jinrui Machinery Factory is located in Xinxiang city,
Henan province ,China. In 1999 year, our company was known as
Xinxiang county mechanical and electrical equipment factory and we
changed the company name as Xinxiang Jinrui Machinery Factory in
2001 year. Our company has 3000 square meters of standardized
production workshop. Company has developed into a set design,
development, production, manufacturing, sales in the integration of
high-tech enterprises.

Our company has passed CE , ISO9001 quality management system
certification and has professional technical team, sales team and
production team. We supply our professional service with CAD &
3D design.

Main products: Belt conveyor machine, sidewall belt conveyor,
enclosed belt conveyor, inclined belt conveyor, troughed belt
conveyor, U trough screw conveyor, tubular screw conveyor,
reversible belt conveyor,impeller feeder, vibratory feeder, movable
belt conveyor,circular vibrating sieve,small vibrating screen,heavy
duty belt conveyor
