170mm NITI Open Coil Spring Orthodontic Instruments 0.010 inch And 0.012 inch

170mm NITI Open Coil Spring Orthodontics Products 0.010inch And 0.012inch

Detailed Product Description:

Orthodontics 170mm Nickel Titanium 0.010inch and 0.012inch Open Spring

Specifications:

170mm NITI Open Coil Spring Used In Dentistry

Description:

1. Open, or compression, coils are 15mm in length when passive and may be compressed to 3mm .

2. Between these points , the coil will exert 50 ( extra light ), 100 ( light ), 150 ( medium ), 200 ( heavy ), or 250 ( extra heavy ) , and 300 ( XX Heavy ) grams of force until 14mm , and then the force falls to 0 as it becomes passive again.

3. These low forces limit patient discomfort and ensure good circulation in the periodontal pocket during movement .

4. Typically, you will see 4mm of space opened in three months ( this varies depending on the age and

health of the patient ).

5. To engage the open coils , mark the archwire where the mesial and distal tooth destinations are located .

6. Crimp on the mesial stop and ligate the archwire up to the point where the spring is to be placed.

7. Slide the coil over the archwire and crimp on the distal stops .

8. Ligate the balance of the wire. Since the Sentalloy coil needs about 1/10 as much wire as steel , good hygiene is much easier , but do advise the patient to rinse and brush around the coil . No other adjustment is needed.

Warning:

1. Only skilled dentists are allowed to use .
2. As this product contain Niti materials , so Niti hypersensitive is careful to use
3. For one time use only

170mm NITI Open Coil Spring Dental

Precautions for use:
1. To prevent infection , sterilize the product with an autoclave and ensure that the sterilization is completed .

2. Choose the most appropriate type for each situation and follow the general approach .

3. Before use, make sure that there is no deformation, scratches and cracks in the instrument outside the dental cavity .

4. If the product's head is thin, long or large, it may break or twist. Because this must avoid using unreasonable angles and excessive pressure .

5. Wear safety glasses to protect your eyes from injury. In addition, wear a dust mask to prevent inhalation of dust .

6. Wear rubber dam and so on. Avoid accidental ingestion and fall .

7. Do not use this instrument for any purpose other than the applications listed above .

8. Only for dentists .

9. After use, dispose of as medical waste properly .

10. Dispose of if product is damaged or contaminated .


Storages and duration of use:

1. Avoid storing at high temperature , humidity and direct sunlight . Keep liquids away. Store it at room temperature .
2. Do not damage or make a pinhole to packaging materials .
3. Do not keep under germicidal lamp to avoid deterioration .

170mm NITI Open Coil Spring

Applications:

Competitive Advantage:

Closed Spring : no distortion will occur during movement .

Shenzhen Perfect Medical Instruments Co. Ltd dedicate to manufacturing and R&D. Our Slogan is Perfect Endo. Perfect endodontic instruments. However, to be really perfect in endodontics instruments is our main target!! It is worth to remind, rotary files are our important line in series of root canal files, with amazing output and incomparable high quality.

To enlarge our product scope is our another achievement. Shenzhen Perfect Medical Instruments Co. Ltd is covering the most completed product range among endodontics instruments manufacturers. In recent years, we keep improving our ability of research in electronic endo devices, All our devices are aiming to be most favorable in price and customers' demands. including the Clinic test, marketing test, and all certificate approval. Our elite R&D of dental electronic department will bring more and more new projects for the dentistry.

Shenzhen Perfect Medical Instruments Co. Ltd is

Perfect in manufacturing

Perfect in researching

Perfect in developing

Perfect in marketing

perfect in selling

Perfect in caring

We strongly believe that offering the perfect endo product is our unchangeable strategy. No matter how stiff the competition in the market is. We are ready to be the better one as always we did.

Nowadays, we are having our 25,000 SQ meters workshop being constructed, looking forward to 2020, it will be the most " brave horse" in the endo files producer in China, we are sincerely welcome all the suppliers and all of our dear global customers to visit us!!!!

endo file catalogue.pdf