

Add to Cart
ABS PP Material Bubble Aeration Big Air Generator Coarse Bubble
Diffuser
Technology Parameter
Model | Type | Connector | Design flow | STOE | Service area(m³) |
dn280 | Spiral Mixing Aerator | 3/4 NPT male thread | 3-4m³/h | ≥38%(6m submerged) | 0.4-0.8 |
Size | Material | Bubble size | Flow range | Water-Head loss | Service life |
8 inch | pp+abs | 3-4mm | 1-8m³/h | 2000-4300pa | >5 years |
Product Description
ABS coarse bubble diffuser adopts the form of multi-layer spiral cutting for oxygen aeration.
When the air flow enters the aerator, the air flow first enters the
multi-layer zigzag air distribution head of the lower layer after
cutting through the two-way spiral cutting system, and then carries
out multi-layer cutting, so that the air bubble is cut into
microbubbles, which greatly improves the utilization rate of
oxygen, and has the characteristics of uniform air distribution and
high oxygen charging efficiency. It is suitable for biochemical
treatment of industrial wastewater, municipal sewage and activated
sludge, aeration device of biological contact oxidation process
sewage treatment and pre aeration of regulating tank, and widely
used in push flow and mixed aeration tanks of biochemical
treatment.
Project Project
Product Advantage
1. No blockage, small gas resistance loss;
2. Compared with microporous aerator, there's no concern for the
gradual deterioration of efficiency.
3. The coarse bubbles can be kept in uniform operation for a long
time.
4. The material is not easy to be aged, the safeguard measures are
comprehensive, and don't need to be cleaned, replaced and
maintained.