Nitrogen PCB SMT Reflow Oven 5300 × 1400 × 1550mm Dimension Forced Air Cooling

Reflow Oven Nitrogen PCB Soldering Machine,SMT Reflow Oven R8-N,Nitrogen Lead-Free Reflow Oven

Use comprehensive closed protective design in hearth, protect nitrogen againest going away, make oxide to 150PPM at minimum, low-level nitrogen-consuming,lower than 18m3/h in 500-1000ppm oxygen,Full fill with nitrogen and oxygen concentration monitored, draw samples from every heating zone,oxygen concentration can be inspected by auto and manual.

Machine with Nitrogen system
1. Nitrogen flow controller: normal nitrogen-consuming: 20m3/hr.@500ppm~1000ppm(oxygen concentration)
2. Full-auto oxygen analysis instrument: fast response time, Complete self diagnostic test important function and parameters
3. colling-water machine: 3HP; Adequate cooling capacity satisfies the requirement of lead-free craft
4. Flux management:Nitrogen furnace cycle standard air filter, optimize the environment of furnace, easy to maintenance.

Specification:

Introduction:
1. Windows XP system with English and Chinese is easy to learn how to operate and can be change any time.
2. The digital control system adopted with PLC and Modular circuit to stabilized and accurate of repetitive precision.
3. Intelligent diagnosis system (IDS) has the function of trouble remind, alarm, list-out and saving data.
4. Temperature and blower speed can be controlled independently, to meet the high-precision requirements.
5. Effective heating zone length, the heat conduction in full uniform distribution, greatly improving the heating efficiency.
6. Forced cooling system with efficient cooling speed suits all different kinds of lead-free soldering paste.
7. PLC and PID closed loop control to achieve high precision temperature control and repeatable profiles.
8. Standard 8 couples of up and down zones with patented air management system to make hot air convection more efficient and faster thermal compensation.
9. The rail is dealt with hardened process to make it more stability.
10. The rail width can be adjusted by manual.(option:automatically by SPG gear motor).
11. Chain Rails will be lubricated by central oil reservior device ,controlled by computer.
12. Strong software system can save all settings and can print all the data and profiles through PC.
13. With flux collecting system to keep inside zones clean and ensures more environmental emission.
14. Nitrogen with machine is option.

JAGUAR SMD Soldering Machine F8 in Thailand Customer Factory:

Shenzhen Jaguar Automation Equipment Co., Ltd (referred to as "Jaguar") is a High-speed developing enterprise of High Precision Automatic lead-free Equipment such as reflow oven and wave soldering machine manufacturer, which specializes in lead free machine research and development.

As one of the well-known lead-free electronics equipment manufacturers in China, JAGUAR was founded in 2009 and headquartered in Shenzhen.

With full implementation of the PID process, reliability design concept and reliability testing throughout the entire product line, The company insists on market demand, established offices in various provinces and cities in the country.