High Strength Conveyor Belt Clamping System Durable Conveyor Belt Repair Kit

XBG-1 type electric heating tape repairer

use:

During the operation of the belt conveyor, due to the block weight, drop, and equipment failure, the surface of the tape is damaged or penetrated, and the core layer is exposed and leaking. It must be repaired in time, and the repairer can be used to repair the vulcanization of the tape surface after the transportation is stopped.

Technical Parameters:

XBG-1 type electric heating tape vulcanizing machine is divided into high pressure and low pressure.

1, XBG (low pressure)

(1), vulcanization pressure: 0.5MPa

(2), vulcanization temperature: 145 ° C

(3), rated power: 2KW

(4), the maximum width of the repairable tape: 140mm

2, XBG (high pressure) parameter list

Schematic:

Instructions:

1. Transfer the parts of the repairing machine to the repair location.

2. Fill in the damage (see the filling part of the vulcanization process of the tape joint, or the demonstration by the service personnel of the factory when the equipment is commissioned).

3. Place the rack (lower frame) under the belt and align it with the damaged part, and place the water pressure plate and the lower heating plate directly under the damaged part.

4. Place the upper heating plate directly under the damaged part of the tape, place the heat insulation board, and put it on the upper frame (Note: XBG low pressure, the frame is integrated).

5. Install the screw and tighten.

6. Connect the power supply and the electric control box with one wire, connect the heating and electric control box, the lower heating plate and the electric control box with the secondary wires respectively, connect the heating plate, the electric control box and the lower heating plate with the temperature measuring components respectively. When connecting with the electric control box, pay attention to the corresponding sign on the electric control box.

7. Connect the water pressure plate and the pressure test pump with a high-pressure hose, then open the electric control box (see the XBG electric control box operation method for details), and fill the water pressure plate with water to the vulcanization pressure.

Jiangyin Tongxin Vulcanizing Machine Factory (formerly Jiangyin Vulcanizing Machine Factory) is located in the scenic Jiangyin Golden Triangle Development Zone in the north of Wuxi City. It was built in 1984 and has 56 employees and 15 engineers and technicians. 21,000 square meters, fixed assets of 5.08 million yuan, is one of the enterprises affiliated to Jiangyin City Industrial Bureau of Jiangsu Province.

The company's main products are DGLJL type electric heating tape vulcanizing machine, DJSL type electric heating tape water cooling vulcanizing machine and vulcanizing machine, repairer parts. The main technical quality indicators of the vulcanizing machine produced by the company are close to the advanced level in foreign countries.

The products have passed the provincial appraisal. The company implements the IS09001:2015 quality management system standard, and the customers are all over the country. It has been rated as the city's quality products for three consecutive years. And for five consecutive years was rated as the city's contract and keeping promises units. The company has a complete set of special equipment for the production of vulcanizing machines and tooling, fixtures, testing equipment and quality assurance system, welcome customers to visit us.