200KW Energy Saving Natural Gas Engine Generator With CHP Heat Recovery System
Brand Name:SevenPower
Certification:CE
Model Number:SP270N
Minimum Order Quantity:1 Set
Delivery Time:30days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Chengdu Sichuan China
Address:
No.255 Rd.WanXing.Avenue Longhu.Industrial East Zone, Xindu,Chengdu,Sichuan,China
Supplier`s last login times:
within 47 hours
Product Details
Company Profile
Product Details
60Hz 200kw 300KVA Natural Gas Generator Set With CHP Energy Saving 300KVA Generator Set With Heat Recovery System
Why SevenPower?
- Environmentally friendly design
- Long time research and development and testing for high
reliability
- Maximum lower the noise level
- Maintenance friendly thanks to easy access
- Long service intervals
- Suitable for mains parallelling
- CE approved
- Installation and maintenance guide
- Free debugging
- Training the operator
- Supply the spare parts during the whole service life.
- Overseas service
STORAGE TIME / RECOMMENDED SERVICE PROCEDURE TO PREVENT HARD
STARTING
Less than 1 month
- Drain all CHP water.
More than 1 month
- Change engine oil.
- Remove the spark plug, and pour about a tablespoon of clean
engine oil into the cylinder. Crank the engine several revolutions
to distribute the oil, then reinstall the spark plug.
- Slowly pull the starter grip until resistance is felt. At this
point, the piston is coming up on its compression stroke and both
the intake and exhaust valves are closed. Storing the engine in
this position will help to protect it from internal corrosion.
Main Specifications
| Item | Model | SP260N | |
| fuel | — | Natural Gas | |
| marks | — | Synchro Genset | |
| CHP | electrical output(KWe) | kVA/kWe | Continuous Power |
| 312.5/270 | |||
| frequency | Hz | 60 | |
| voltage | V | 440/254 | |
| gas inlet pressure | kPa | 3-5 | |
| dimension (soundproof type) | mm*mm*mm | 2900*1600*1800 | |
| net weight | kgs | 3500 | |
| NG consumption | m3/kW.h | 0.29 | |
| standard type-db(A)@7m | — | 59 | |
| Certificate | — | CE | |
| ignition system | — | Altronic or ECI | |
| speed governor | — | Woodward or Hainzmann or ECI | |
| mixer | — | Venturi type | |
| gas filter | — | Madas | |
| zero regulator | — | Kromschroeder | |
| Lambda auto control | — | Available on request | |
| emission standard | — | Available on request | |
| MCB | — | ABB | |
| GCB | — | ABB | |
| Controller | ComAp IC | ||
| Engine | Engine model | — | MT13 |
| Engine type | — | 6 cylinders,4stroke,water-coolled | |
| RPM | — | 1800 | |
| Compression Ratio | — | 11.0 | |
| Displacement | — | 11.6L | |
| Oil capacity | — | 36L | |
| Charging voltage | — | 24V(DC) | |
| Charging current | — | 5A(DC) | |
| Starting system | — | Electic-start | |
| Alternator | model | — | Meccalte |
| phase | — | 3 phase 4 wires | |
| insulation system | — | class H | |
| protection | — | IP23 | |
| Cooling Type | — | air cooled |
For more information about the Genset, please consult with your sales representative.Thanks.
Options: Multi-units In Parallel + Synchronization to Grid + Remote Control
200KW Energy Saving Natural Gas Engine Generator With CHP Heat Recovery System
Inquiry Cart
0