

Add to Cart
Introduction of sand dryer:
three pass river sand drum rotary dryer adopts the latest European
energy saving technology,clamp type structure. Internal
cylinder,middle cylinder and outer cylinder form a since the
insulation structure. Special thermal design idea,the emlimination
of wind tunnel heat loss,increase the heat exchange area and unit
volume evaporation intensity,good energy saving effect.The three
pass river sand drum rotary dryer is used for drying sand,yellow
sand,slag,clay and other raw materials,widely used in building
materials,chemical industry,foundry industry,etc,can adapt to a
variety of fuels such as coal,oil and gas.
Specifications of sand dryer:
Three Pass Dryer | TDS623 | TDS625 | TDS6210 | TDS6220 |
Drying Capacity | 1-3 m3/h | 4-6m3/h | 10-14m3/h | 20-30m3/h |
Diameter Of Drum | 2200mm | 2200mm | 2500mm | 2600mm |
Length | 1500mm | 2500mm | 2700mm | 3700mm |
Motor Power | 4KW | 5.5KW | 4KWX2 | 5.5KWX2 |
Reducer Model | XWD-5 | XWD-5 | XWD-5 | XWD-5 |
Speed Of Drum Rotation | 4-10r/min | 4-10r/min | 4-10r/min | 4-10r/min |
Moisture Of End Products | 0.1%-0.8% | 0.1%-0.8% | 0.1%-0.8% | 0.1%-0.8% |
Max. Temperature Inside | 700-750℃ | 700-750℃ | 700-750℃ | 700-750℃ |
Outlet Temperature | 30-60℃ | 30-60℃ | 30-60℃ | 30-60℃ |
Working Principles of sand dryer:
The heat source of drum rotary dryer comes from the combustion train, and adopts down-flow heating methods. When the materials enter into the body from feeding device, it will be pushed back by the spire raising board. As the dryer is in an inclined position, the materials will be down to the lower end under the influence of gravity and rotation, but the raising board will be threw to the upper end for scattering. This process make the material well-distributed in the body, then ensure the heat exchanged by heat wind. After repeated cycle with this process, the moisture content can be dried.
Applications of sand dryer
three pass river sand drum rotary dryer is made by our company used on building materials, metallurgy, chemical industry, cement plant for drying of sand, sawdust, wood shavings, chicken manure, iron ore, limestone slag, coal powder, slag, clay stone,etc. This Rotary Drum Drier is composed of rotary body, lifting blade, driving device, supporting device and sealing ring,etc.
Features of sand dryer
1. Low base investment
Because the cylinder length of the three-cylinder dryer is one
third of single-cylinder dryer and the base area saves about 60%
than the single-cylinder dryer, the base investment is reduced
correspondingly.
2. Low noise pollution
The dryer drives by adopting the friction between supporting roller
and belting leather, and the transmission power is low, thereby
reducing the noises when the equipment working.
3. Long Lifetime
The cylinder and lifting board of the dryer both adopt alloy steel
plates which is double service life of common steel plates.