PLC Cloth Pulse Dust Collector 0.5 - 0.7 Mpa Compressed Air Bag Station
Brand Name:Mind
Certification:ISO, CE
Minimum Order Quantity:1 Set
Delivery Time:7-20 Working Days
Payment Terms:T/T, L/C, D/A, D/P, Western Union, MoneyGram
Place of Origin:China(Mainland)
Contact Now
Add to Cart
Active Member
Location:
Zhengzhou Henan China
Address:
Shenglong Office Building, High-tech Zone, Zhengzhou City, Henan Province
Supplier`s last login times:
within 11 hours
Product Details
Company Profile
Product Details
PLC Cloth Pulse Dust Collector 0.5 - 0.7 Mpa Compressed Air Bag Station
Brief Introduction of Impulse Dust Collector:
Pulse dust catcher on the basis of the bag filter to improve the new type of efficient pulse dust collector, a combination of chamber blow, the advantages of different pulse injection filter overcomes the chamber soot cleaning strength is not enough, in and out of the wind unequal distribution of faults, to expand the application range.
Pulse dust collector is when dusty gas from the air inlet to filter, first met in the middle of the outlet inclined plate and baffle, air turned into the ash bucket, slowing down of air flow at the same time, due to inertia effect, coarse particles of dust in the gas directly into the hopper.
Dust in advance of the role, the airflow into the ash hopper then fold and upward through internal filter bag dust containing metal skeleton was set on the outer surface of the filter bag, after purification, the upper gas into the filter bag chamber clean room, packed into the outlet discharge, through the filter bag dust gas purification process, with the increase of time and accumulate more and more attached to the filter bag dust, increase the resistance of filter pocket, the parameters of gradually reduce, to work, to control the resistance within a certain range (140-170 mm water column), once more than must be carried out on the filter bag dust, soot triggered by pulse controller order of each control valve open pulse valve, air bags of compressed air by spray torch each hole scripture's tube into the corresponding filter bag, filter bag instant swelling, make the product attached to the surface of the filter bag dust fall off, filter bag to restore the initial state.
Clear the dust into the hopper, the ash discharge system out of the body. Thus makes the product attached to the filter bag dust pulse blowing soot cleaning cycle, purified gas through normally, guarantee the dust removal system is running. Clear the dust into the hopper, the ash discharge system out of the body.
Thus makes the product attached to the filter bag dust pulse blowing soot cleaning cycle, purified gas through normally, guarantee the dust removal system is running.
Parameters of Cloth Dust Collector:
| Model | DMC-32 | DMC-48 | DMC-64 | DMC-80 | DMC-96 | |
| Total filtration area(m2) | 24 | 36 | 48 | 60 | 72 | |
| Filtration wind speed(m/min) | 1.04～1.67 | 1.15～1.62 | 1.21～1.74 | 1.25～1.67 | 1.27～1.62 | |
| Handling air volume(m3/h) | 1500～2400 | 2500～3500 | 3500～5000 | 4500～6000 | 5500～7000 | |
| Number of filter bags | 32 | 48 | 64 | 80 | 96 | |
| Air consumption(m3/min) | 0.032 | 0.048 | 0.064 | 0.08 | 0.096 | |
| Inlet concentration(mg/Nm3) | 200 | |||||
| Export concentration(mg/Nm3) | 50 | |||||
| Injection pressure(Mpa) | 0.5～0.7 | |||||
| Understand negative pressure(Pa) | 5000 | |||||
| Equipment resistance(Pa) | ≤1200 | |||||
| Pulse valve | Specification | 1" | ||||
| Amount | 4 | 6 | 8 | 10 | 12 | |
| Motor model | Y90S-2 | Y90L-2 | Y100L-2 | Y132S1-2 | Y132S1-2 | |
| Power(KW) | 1.5 | 2.2 | 3 | 5.5 | 5.5 | |
FAQ:
1. Are you the manufacture or trading company?
We are the manufacturer with professional produce experience on 导dry mortar machine more than 10 years. We own both of Domestic and international sales department.
2. Where is your factory located?
Our factory is located in Zhengzhou city, Henan province, welcome to visit.
3. Can you send the goods to my home?
Sure, usually we delivery the goods by sea to port, or plane to
airport.
But, if the customer asks us to delivery to home, we also can do
it.
4. Do you provide guarantee of the vibrating screen ?
A: Yes, all our products provides guarantees according to industry
standards.
5. Can I be your agent?
Yes, if you want to become our distributor in your place, we are pleasure that we share profits and cooperate together.
More information of that, please contact with me. Thanks.
6. How long is the warranty?
The warranty is 12 month(except the wearing parts).Because
different usage, the wearing parts will have different life.
7. What is the real delivery time of your factory?
About 7 to 10 working days for general series products, meanwhile, customized products would need 20 days to 40 days based on different situations.
PLC Cloth Pulse Dust Collector 0.5 - 0.7 Mpa Compressed Air Bag Station
Inquiry Cart
0