Wash Tunnel Spiral Screw Conveyor With Durable Stainless Steel Honed Tube

Wash Tunnel Screw Spiral Augers Conveyor Powder Stainless Steel Honed Tube

Brief Introduction

The screw conveyor improves of the GX type screw conveyor. It adopts the head and tail bearing moving to outside of the shell, with sliding hanging bearing, dust-proof seal device, the machine is in high reliability, good adaptability, easy installation and maintenance.

Specifications

Diam100, 160,200,250,315,400,500,630,800,1000,1250mm length is from 4m to 70m , every 8.5m is first gearl, when the length is more than 35m, it adopt to double-end drive. When select the model, it should conform to the standard nominal length, and can propose the special needs separately.

Features

1) In line with international ISO1050-75 standard, ZBJ1005.1-2-88 professional standard.

2) Its technical index is advanced, and the structure is novel.

3) So it has tightness good, strong abrasion,small resistance, long life.

4) The machine has low noise, high adaptability.

5) And it's operation and maintenance is easy, the inlet and outlet is flexibility.

Apply in Industry

1. Widely used in building materials, electric power, chemical industry, metallurgy, coal, machinery, and light industry, food and food industry;

2. Screw conveyor mainly convey powder, granular and small-block materials , such as cement, coal, grain, chemical fertilizer, ash, sand, etc. The material temperature should not exceed 200 °;

3. Work environment should be between -20 °C ~ 50 °.

Working Principle

LS-type screw conveyor is in line with international standards, which is equivalent to ISO1050-75 standard, and its design and manufacture in line with ZBJ1005.1-2-88 professional standard with advanced technical index and the novel structure.

Compared to the GX type, the head and tail bearings of the LS type screw conveyor move out of the shell, the hanging bearing adopts the exchange structure of the rolling type and pulley bearing has swap structure. And it has dust sealing device with nylon and plastic, so it has tightness good, strong abrasion, small resistance, long life.

Sliding bearing bush contains bronze tiles need to add lubricant, alloy cast iron and the grinding of graphite tiles and copper tiles less oil lubrication. The discharging-side set dissection device.

The machine has low noise, high adaptability. And it's operation and maintenance is easy, the inlet and outlet is flexibility.

Technical Parameters

Note: can increase the negative pressure devices for users, Minimum screen to 5 microns.

Packing

Our Service

1. Professional engineers team can choose the right equipment for you;

2. We can provide thorough after-sales service to ensure the proper use of machine.

3. We can provide OEM customization.

4. We can provide thorough after-sales service to ensure the proper use of machine.

5. We can provide OEM customization.

If you want to get more information of product, please contact us!

Xinxiang Tongxin Machinery Co. LTD. was established in 1996, mainly design and manufacture vibrating screen equipment, conveying equipment, lifting equipment, mixing equipment, dust removal equipment and other kinds of powder equipment.

After more than 20 years development with the support of governments at all levels, we have 2 senior engineers and several intermediate or junior engineers with independent design and development capabilities. Xinxiang Tongxin Machinery has plant covers an area of more than 2000 square meters and office building covers an area of 800 square meters with 50 years of property rights to laid a firm foundation for a long-term stable service.

Xinxiang Tongxin Machinery has a variety of CNC machining equipment, such as machining center, CNC lathe, CNC gantry drilling machine, CNC welding machine, CNC laser cutting machine, CNC bending machine, CNC plate shearing machine, large wave folding machine, metal netting machine, etc., we have now reached automatic production of blanking, welding, machining and other processes by cooperating with a large number of tools and molds to form an automated production line, and is committed to gradually realizing data interconnection and unmanned intelligent production. The use of automation equipment has greatly improved the production efficiency, and reduced the cost of a single machine, so that Xinxiang Tongxin Machinery in the premise of quality assurance to the general customers.

The designers of Xinxiang Tongxin Machinery are committed to meet the differentiated requirements of different users, we provide customized design services, improve product adaptability, optimize the cost performance from the deep understanding of the product working principle and user process. At the same time, Xinxiang Tongxin Machinery is equipped with a large number of testing and experimental equipment for the product delivery test to ensure the product consistency and stability and provide a high-precision products to users.

At present, Xinxiang Tongxin Machinery has been exported to 46 countries on 5 continents, including North America, Europe, Southeast Asia, South America, West Asia, Middle East and Africa and we have over 13,000 active users in China. The main users include international famous enterprises and advanced scientific research institutions, the most representative are Air China, CICC, China Metallurgical Group Corporation, CNPC, Sinopec, Charoen, Pokphand, Chinese Academy of Sciences, China National Medical Administration and so on.

The tenet of Xinxiang Tongxin Machinery is: "with superb technology to deeply understand the needs of users, continue to improve the quality, provide a full line of customization. With high quality, first-class service to fulfill the commitment to customers ". All the staff of our company are committed to providing high quality service for customers.

In 2016, Xinxiang Tongxin Machinery was successfully listed on the new fourth board.