Sysolution Single GPS Location Modem G10 for Y08/Y12/Y60 Controllers for led vehicle signs

Brand Name:Sysolution
Certification:FCC,CE certification
Model Number:G10
Minimum Order Quantity:1
Delivery Time:2-3 working days
Payment Terms:T/T,PayPal
Contact Now

Add to Cart

Site Member
Location: Shanghai Shanghai China
Address: NO.501,Floor 5,Building31, Lane 1555, West Jinshajiang Road, JiaDing District, Shanghai ,China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Sysolution GPS modem G10

Product Introduction:

G10 is a complete GPS&GLONASS&Galileo&QZSS engine module that features super sensitivity, ultra low power and small form factor. The GPS&GLONASS&Galileo& QZSS signal is applied to the antenna input of module, and a complete serial data message with position, velocity and time information is presented at the serial interface with NMEA protocol or custom protocol.

Its – 165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense foliage environment where the GPS&GLONASS&Galileo&QZSS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like DVR,UVA,Car trackers and PNDs.


Product Image:


Applications

  • UVA (unmanned aerial vehicle)
  • DVR ( Digital Video Recording)
  • Rear view mirror DVR

Car Tracker


Specifications :

TypeParameter
Main chipMTK 3333
Track sensitivity-165dBm
Time to First FixExtremely fast at low signal level
Built in high LNAYES
Power consumptionMax 40mA@3.3V
ProtocolNMEA-0183 compliant protocol or custom protocol
Operating temperature-40 to 85C
Operating voltage3.0V to 5.0V
Module typeUART/TTL
Size45x38x13mm
CertificationRoHS compliant(Lead-free)
Power SupplySupply voltage:3.0V~5.0V Typical : 3.3V
Power Consumption

Acquisition:45mA @VCC=VBAT=3.3V

Tracking:40mA @VCC=VBAT=3.3V

Standby:2.0mA @VCC=VBAT=3.3V

Backup:20uA @VBAT=3.3V

Receiver TypeCode 66 search channels, 22 synchronous tracking channels GPS&&QZSS L1 1575.42MHz C/A,GLONASS L1OF 1602MHz,GALILEO E1B/C1, GLONASS L1OF 1602MHz, SBAS: WAAS, EGNOS, MSAS, GAGAN
Sensitivity

Tracking: - 165d Bm

Re-acquisition:- 156d Bm

Acquisition:- 148d Bm

TTFF (EASY enabled)

Cold start :15s typ @- 130d Bm

Warm start : 5s typ @- 130d Bm

Hot start :1s typ @- 130d Bm

TTFF (EASY disabled)

Cold start(Autonomous):35s typ @- 130d Bm

Warm start (Autonomous) :30s typ @- 130d Bm

Hot start (Autonomous) :1styp @- 130d Bm

Horizontal Position

Accuracy (Autonomous)

<2.5m CEP @- 130 dBm
Max Update RateUp to 10Hz, 1Hz by fault
Accuracy of 1PPS Signalnot enabled
Acceleration AccuracyWithout aid: 0.1m/s2
Dynamic Performance

Maximum altitude: 18,000m

Maximum velocity: 515m/s

Acceleration: 4G

UART Port

UART Port : TXD and RXD

Supports baud rate from 4800bps to 115200bps, 9600bps by default

UART port is used for NMEA output, MTK proprietary commands input and firmware upgrade

Temperature Range

Normal operation: -40°C ~ +85°C

Storage temperature: -45°C ~ +125°C


Physical Characteristics

Size: 45±0.20 × 38±0.20 ×13±0.50mm

Connecting line specifications:Molex 2*2Pin , L= 130CM

Weight: Approx. 98g

Power Supply

Regulated power for the G10 is required. The VCC Pin Need a stable DC voltage supply. Power supply ripple must be less than 30mV. The input voltage Vcc should be 3.0V~5.0V, Recommended power supply voltage is 3.3V . maximum current is 45mA. Suitable decoupling must be provided by external decoupling circuitry.

UART Ports

The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 115kbps. UART port can be used for firmware upgrade, NMEA output and PMTK proprietary commands input.

Application

The module is equipped with a Molex 2*2Pin connects to your application platform. The G10 module It consists of a MediaTek MT3333 single chip GNSS IC which includes the RF part and Baseband part, a patch antenna, a LNA, a SAW filter, a TCXO, a crystal oscillator, Also comes with a 0.22F crystal capacitor ,can backup satellite ephemeris about 2 hour.


PIN Definition:

Pin No.Pin nameI/ODescriptionRemark
1RXDIUART Serial Data Input
2GNDGGround
3TXDOUART Serial Data output
4VCCIModule Power SupplyVoltage range: 3.0V~5.0V

Dimension:



NMEA 0183 Protocol


The NMEA protocol is an ASCII-based protocol, Records start with a $ and with carriage return/line feed. GPS&GLONASS specific messages all start with $GPxxx/$GLxxx where $GNxxx is a three-letter identifier of the message data that follows. NMEA messages have a check sum, which allows detection of corrupted data transfers.

1. Location mode configuration instruction

Single system or dual system positioning mode can be selected through the configuration instructions, configuration instructions such as Table 1.

Table 1: Instruction configuration instructions

PatternInstructionsNMEA Out Put
GPS$PMTK353, 1,0*36GPRMC.GPGGA.GPGSV.GPGSA.GPGLL.GPVTG
GLONASS$PMTK353,0, 1*36GLRMC.GLGGA.GLGSV.GLGSA.GLGLL.GLVTG
GPS&GLONASS$PMTK353, 1, 1*37

GNRMC.GNGGA.GPGSV.GLGSV.GPGSA.GLGSA.

GNGLL.GNVTG

The ASIR AGM-41G-33MX130initialization location mode for GPS&GLONASS dual mode.

Output data :$GNRMC. $GNGGA. $GPGSV. $GLGSV. $GPGSA. $GLGSA.$GNGLL. $GNVTG

2. NMEA-0183 data Detailed field

2.1. GGA-Global Positioning System Fixed Data

$xxGGA, 161229.487,3723.2475,N, 12158.3416,W, 1,07, 1.0,9.0,M.0000*18

Table 2: GGA Data Format

NameExampleUnitsDescription
Message ID$xxGGAGGA protocol header
UTC Position161229.487hhmmss.sss
Latitude3723.2457ddmm.mmmm
N/S indicatorNN=north or S=south
Longitude12158.3416dddmm.mmmm
E/W IndicatorWE=east or W=west
Position Fix Indicator1See Table 2- 1
Satellites Used07Range 0 to 12
HDOP1.0Horizontal Dilution of Precision
MSL Altitude9.0meters
UnitsMmeters
Geoids Separationmeters
UnitsMmeters
Age of Diff.Corr.secondNull fields when DGPS is not Used
Diff.Ref.Station ID0000
Check sum*18
<CR> <LF>End of message termination

Table 2-1: Position Fix Indicators

ValueDescription
0Fix not available or invalid
1GPS&GLONASS SPS Mode, fix valid
2Differential GPS&GLONASS, SPS Mode, fix valid
3GPS&GLONASS PPS Mode, fix valid
  • GLL-Geographic Position – Latitude/Longitude

$xxGLL , 3723.2475, N, 12158.3416, W, 161229.487, A*2C.

Table 3: GLL Data Format

NameExampleUnitsDescription
Message ID$xxGLLGLL protocol header
Latitude3723.2475ddmm.mmmm
N/S IndicatorNN=north or S=south
Longitude12158.3416dddmm.mmmm
E/W IndicatorWE=east or W=west
UTC Position161229.487hhmmss.sss
StatusAA=data valid or V=data not valid
Check sum*2C
<CR> <LF>End of message temination
  • GSA-GNSS DOP and Active Satellites

$xxGSA , A, 3, 07, 02, 26,27, 09, 04, 15, , , , , , 1.8, 1.0, 1.5*33.

Table 4: GSA Data Format

NameExampleUnitsDescription
Message$xxGSAGSA protocol header
Mode 1ASee Table 4-2
Mode 23See Table 4- 1
Satellite Used07Sv on Channel 1
Satellite Used02Sv on Channel 2
Satellite UsedSv on Channel 66
PDOP1.8Position Dilution of Precision
HDOP1.0Horizontal Dilution of Precision
VDOP1.5Vertical Dilution of Precision
Check sum*33
<CR> <LF>End of message termination

Table 4-1: Mode 1

ValueDescription
1Fix not available
22D
33D

Table 4-2: Mode 2

ValueDescription
MManual-forced to operate in 2D or 3D mode
AAutomatic-allowed to automatically switch 2D/3D
  • GSV-GNSS Satellites in View

$xxGSV , 2, 1, 07, 07, 79,048, 42, 02, 51,062, 43, 26, 36,256, 42, 27, 27, 138,42*71

$xxGSV, 2, 2, 07, 09, 23,313, 42, 04, 19, 159, 41, 15, 12,041, 42*41.

Table 5: GSV Data Format

NameExampleUnitsDescription
Message ID$xxGSVGSV protocol header
Number of Message2Range 1 to 3
Message Number1Range 1 to 3
Satellites in View07
Satellite ID07Channel 1(Range 1 to 66)
Elevation79egreesChannel 1(Maximum 90)
Azinmuth048egreesChannel 1(True, Range 0 to 359)
SNR(C/NO)42BHzRange 0 to 99,null when not tracking
Satellite ID27Channel 4(Range 1 to 66)
Elevation27egreesChannel 4(Maximum 90)
Azimuth138egreesChannel 4(True, Range 0 to 359)
SNR(C/NO)42BHzRange 0 to 99, null when not tracking
Check sum*71
<CR> <LF>End of message termination

Depending on the number of satellites tracked multiple messages of GSV data may be required.

  • RMC-Recommended Minimum Specific GNSS Data

$xxRMC, 161229.487, A, 3723.2475, N, 12158.3416, W, 0. 13,309.62, 120598,, *10


Table 6: RMC Data Format

NameExampleUnitsDescription
Message ID$xxRMCRMC protocol header
UTS Position161229.487hhmmss.sss
StatusAA=data valid or V=data not valid
Latitude3723.2475ddmm.mmmm
N/S IndicatorNN=north or S=south
Longitude12158.3416dddmm.mmmm
E/W IndicatorWE=east or W=west
Speed Over Ground0. 13Knots
Course Over309.62DegreesTrue
Ground
Date120598ddmmyy
Magnetic variationDegreesE=east or W=west
Check sum*10
<CR> <LF>End of message termination
  • VTG-Course Over Ground and Ground Speed

$xxVTG, 309.62, T, M, 0. 13, N, 0.2, K*6E

Table 17: VTG Data Format

NameExampleUnitsDescription
Message ID$xxVTGVTG protocol header
Course309.62DegreesMeasured heading
ReferenceTTrue
CourseDegreesMeasured heading
ReferenceMMagnetic
Speed0. 13KnotsMeasured horizontal speed
UnitsNKnots
Speed0.2Km/hrMeasured horizontal speed
UnitsKKilometer per hour
Check sum*6E
<CR> <LF>End of message termination

China Sysolution Single GPS Location Modem G10 for Y08/Y12/Y60 Controllers for led vehicle signs supplier

Sysolution Single GPS Location Modem G10 for Y08/Y12/Y60 Controllers for led vehicle signs

Inquiry Cart 0