

Add to Cart
Matrix Network Packet Broker Plug in Module for Telecom Operator
Traffic Collection
Background Introduction
With the acceleration of carrier broadband construction and the
rapid development of 3G, 4G, and 5G networks, and with the
popularity and development of big data and cloud computing
technologies, data traffic is growing, and the bandwidth
requirements for backbone networks and core networks are
increasing. Since 2013, the major operators have begun to gradually
upgrade the backbone network. The core backbone network
transmission link media starts to be expanded from 10GPOS and
40GPOS links to 100G Ethernet links. It will inevitably lead to the
continuous updating of big data collection and analysis technology.
In the face of 100GE link environment with high bandwidth capacity,
how to effectively meet the requirements of various national
security, network security monitoring, operator intelligent
pipeline DPI data collection and analysis will become a hot spot in
the field of data acquisition and analysis.
Chengdu Shuwei Communication is following the development direction
of the Internet and develop the MATRIX-TCA-CG Traffic
Acquisition(Traffic Capture) Visibility System, and dedicated to
the traffic collection and visual analysis application requirements
on 1GE, 10GE, 10G/40G POS, 40GE and 100GE links. The MATRIX-TCA-CG
integrates free-steering output functions such as network flow
collection/acquisition, aggregation, filtering,
forwarding/distribution, and load balancing and provides an
efficient solution for the flow analysis.
Matrix-TCA-CG is a network data visualization control device for
high density and large flow of 10G/40G/100G.
Matrix-TCA-CG is specially designed for the data collection of 10GE
40GE and 100GE links distributed intensively in operators mobile
Internet export, IDC export, provincial network and backbone.
Based on ATCA standard architecture, MATRIX-TCA-CG has high
carrier-level reliability and strong expansibility which can
smoothly configure the functional board CARDS to cope with port
demand scenarios of various specifications and sizes.
The NTCA-CHS-7U7S is a 7U standard rack height. The chassis adopts
the horizontal slot service slot mode. The device supports a total
of seven slots, including two switching slots and five service
slots. Each slot provides 300W cooling capacity, the chassis uses a
pull-type cooling air duct to provide good heat dissipation
performance for the whole machine. The backplane adopts a dual-star
architecture, providing 200Gbps full-duplex interconnected channels
in each switch slot to the service slot. Fully equipped with two
switch cards can achieve 400G backplane bandwidth per service slot.
Carrier–class System Architecture
Advanced specification PICMG 3.0 R2.0
RoHs,Designed for CE,FCC,NEBS Level 3
Standard Dual Dual Star 100G speed backplane
Rich Interface Types
Supported high density 10G, 40G, 100G link interface
Supported all port line speed work without packet loss
Rich Network Traffic Processing Mechanism
Supported 1->N, M-> N, M-> N channels traffic replication
& aggregation
Supported packet filtering matching, including SIP, DIP, SP, DP,
protocol number, arbitrary position feature code identification,
input interface and other elements of flexible combination
filtering conditions
Supported DPI deep message analysis and processing
Supported GTP, GRE and other tunnel protocol IP identification
& distribution
Supported multiple rule combinations
Supported the number of rules above 100,000 level
Supported filtering rule black and white list
Load Balance
Supported dynamic load balancing or custom load balancing in/across
single board
Supported the hash load balancing calculation of multiple
combination conditions
Supported load balancing arbitrary binding of output port group
members
Flexible Port Collocation
Supported all ports as input, output port by user-defined
Supported for members of the same port group not restricted by port
types
Supported any binding of input and output port groups in single
board/cross board
3G/4G/5G Network Signal Acquisition Solutions of Operators
To deploy high-performance, high-capacity MATRIX-TCA-CG network
data visualization control system, can complete the operator
3G/4G/5G network arbitrary link signaling or user data collection.
Then, through the perspective of the size, structure and
relationship of data traffic through the system, the invisible data
signals are transformed into visible entities, and users can copy,
converge and stream the required target data to the back-end signal
acquisition and decoding system for in-depth processing according
to the feedback information of the system.
Network Packet Broker Specification and Module Type
Component type | Product Model | Basic Parameter | Remarks |
Chassis | NTCA-CHS-7U7S-DC | Height:7U,7 slots, ATCA Chassis, double star 100G backplane, 3 high voltage DC(240VDC~280VDC) input,3* 2+1 redundant 3000W power modular | Must choose one |
NTCA-CHS-7U7S-AC | Height:7U,7 slots, ATCA Chassis, double star 100G backplane, 3 high voltage AC(240VDC~280VDC) input,3* 2+1 redundant 3000W power modular | ||
Service card | NT-TCA-SCG10 | 100G exchange card,10*QSFP28 interface | Choose according to actual business needs |
NT-TCA-CG10 | 100G service card,10*QSFP28 interface | ||
NT-TCA-XG24 | 10G service card,24*SFP+ interface | ||
NT-TCA-RTM-CG10 | 100G RTM card,10*QSFP28 interface | ||
NT-TCA-RTM-EXG24 | 10G RTM card,24*SFP+ interface | ||
TCA Visibility Embedded software system | NT-TCA-SOFT-PKG | must |
Machine Specification
Items | Specifications |
Chassis size | NTCA-CHS-7U7S-DC:310.45mm(H) × 482.6mm(W)× 443.6mm(D) |
NTCA-CHS-7U7S-AC:310.45mm(H) × 482.6mm(W)× 443.6mm(D) | |
NTCA-CHS-16U14S-DC:708.35 mm(H) × 482.6mm(W)× 502.15mm(D) | |
NTCA-CHS-16U14S-AC:708.35 mm(H) × 482.6mm(W)× 502.15mm(D) | |
Adapter chassis and power | Power supply |
NTCA-CHS-7U7S-DC:High voltage DC(240VDC~280VDC) | |
NTCA-CHS-7U7S-AC:220V AC | |
NTCA-CHS-16U14S-DC:High voltage DC(240VDC~280VDC) | |
NTCA-CHS-16U14S-AC:220V AC | |
Power: | |
NTCA-CHS-7U7S-DC:Full configuration maximum power consumption < 3000W | |
NTCA-CHS-7U7S-AC:Full configuration maximum power consumption < 3000W | |
NTCA-CHS-16U14S-DC:Full configuration maximum power consumption < 5000W | |
NTCA-CHS-16U14S-AC:Full configuration maximum power consumption < 5000W | |
Environment requirement | Working temperature:0℃~50℃ |
Storage temperature:-20℃~80℃ | |
Working humidity:5%~95%,Non-condensation | |
Standard Certification | Advanced®specification PICMG® 3.0 R2.0 |
RoHs,Designed for CE,FCC,NEBS Level 3 |