Buried Industrial Wastewater Treatment Equipment Corrosion Resistant
Brand Name:BENENV
Certification:SW17Q10910R0S
Model Number:WSZ-AO-3
Minimum Order Quantity:1 Set
Delivery Time:2-6 weeks
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Address:
Building B,C,F, Xieqiao Industry Park, E.p.Science Technology Park, Yixing, Jiangsu, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Buried Integrated Industrial Wastewater Treatment Tank
Brief introduction
Integration of sewage treatment equipment, sewage treatment plant
in China and on the basis of operating experience, combined with
their own scientific research and engineering practice, design a
kind of integrated organic wastewater treatment plant, removal of
BOD5, COD and NH3 - N in one, with technology is stable and
reliable performance, good treatment effect, saving investment,
automatic operation, maintenance is easy to operate, don't cover
surface area, do not need to build, do not need to heating of the
heat preservation, etc. Integrated domestic sewage treatment
equipment can be set into the buried ground, the ground can be
planted flowers and grass, without affecting the surrounding
environment.
Integration of sewage treatment equipment suitable for use in a
residential area, villages, towns and villages, office buildings,
shopping malls, hotels, restaurants, nursing homes, organs,
schools, units, hospitals, highways, railways, factories, mines,
scenic spots such as sewage and similar slaughter, aquatic products
processing, food and other small and medium size industrial organic
wastewater treatment and reuse. The sewage treated by the equipment
meets the national discharge standard.
Application
1. Electroplate effluent contain many kinds of metal
ion,Cr,Cu,Fe,Zn ,Ni etc remove rate all above 90%, after treatment,
all can reach discharge standard.
2. Coal mine,mineral processing waste water all can make the
turbidity from 500-1500 mg/L reduce to 5 mg/L.
3. Printing and dyeing,bleach and dye etc effluent chroma removing
rate reach 70-90%,COD remove rate 50-70%.
4. Tannery ,food etc industrial sewage COD remove rate 50-80%,
impurity solids remove rate above 90%.
5. Chemical waste water COD remove rate 60~70%, chroma removal rate
60-90%, suspended solids reach discharge standard.
Products Features
1. The secondary biological contact oxidation process adopts push
flow biological contact oxidation, and its treatment effect is
better than that of the fully mixed type or the two-stage series
fully mixed biological contact oxidation tank. It is smaller than
the activated sludge tank, has strong adaptability to water
quality, good impact load resistance, stable effluent water
quality, and does not cause sludge swelling. A new type of elastic
three-dimensional filler is used in the tank, which has a large
specific surface area, and the microorganisms can easily hang and
remove the film. Under the same organic load condition, the removal
rate of organic matter is high, and the solubility of oxygen in the
air can be improved.
2. The biochemical tank adopts biological contact oxidation method.
The volume load of the filler is relatively low, the microorganisms
are in the self-oxidation step, and the sludge production is small.
It only needs to drain the sludge once more than three months (90
days) (suction with a dung cart or Dehydrated into mud cakes for
delivery).
3. The entire equipment processing system is equipped with a fully
automatic electrical control system and equipment fault alarm
system, which is safe and reliable in operation. Generally, no
special person is required to manage, and only the equipment needs
to be maintained and maintained in a timely manner.
Specifications and Models
| Model | WSZ-AO-3 | WSZ-AO-5 | WSZ-AO-10 | WSZ-AO-15 | WSZ-AO-20 | WSZ-AO-25 | WSZ-AO-30 | WSZ-AO-50 |
Water in BOD5(mg/L) | 200 | |||||||
Water out BOD5(mg/L) | 10 | |||||||
| Capacity(m³/h) | 3 | 5 | 10 | 15 | 20 | 25 | 30 | 50 |
| Weight(t) | 9 | 16 | 35 | 41 | 48 | 54 | 60 | 85 |
Packing and Delivery
1. The normal package is plastic cloth for main machine and wooden for parts.The wooden box will be fumigated, can also pack it according to customers special request.
2. The normal package is plastic cloth for main machine and wooden for parts.The wooden box will be fumigated, can also pack it according to customers special request.
Why Choose Us?
1. BENENV has more than 2 decades of experience in wastewater and
sludge treatment.
2. We introduce Japanese technology and hire Japanese experts, thus
our product is far more better than other Chinese manufacturers.
3. We only use the best parts from best supplier.
4. We have our own R&D center and complete manufacture system.
The normal lead time is 7-15 days, which depends on your quantity.
Buried Industrial Wastewater Treatment Equipment Corrosion Resistant
Inquiry Cart
0