JSP-2 Graphite Slide Plates Steel Base Self Lubricating Dust Resistant

JSP-2 steel base self-lubricating skateboard Product parameters

Product Features:

JSP-2 steel-based inlaid self-lubricating skateboard is made of steel plate as the base body, and the surface is set with a special formula of solid lubricant at a certain angle and density. The product combines the wear resistance of steel and the self-lubricating property of solid lubricant. So that it does not need to be maintained or used during maintenance. The product has the characteristics of high bearing capacity, impact resistance and strong self-lubricating ability, and is especially suitable for heavy load, low speed, reciprocating or swinging, etc., which are difficult to lubricate and form an oil film. Moreover, its working life is longer than ordinary sliding bearings.

Products are widely used in high load, intermittent or rocking sports. If the product can be used for reciprocating guide bushes that work frequently, such as automobile molds. It is especially suitable for the support of the hoisting machinery. Example: excavator support, crane support, etc. However, since the substrate is made of steel, it should not be used in water or in acid and alkali.

Applications:

In mechanical design, if you encounter the following difficulties, you may consider using

1. The oil lubrication film cannot be maintained under low speed and heavy load conditions;

2, work at high or low temperatures, or the ambient temperature changes greatly;

3. Impact loads are likely to occur during work;

4, need to start frequently or under high load;

5, long maintenance period or high maintenance costs, requiring a long working life of the bearing;

6. It is difficult to supply lubricating oil due to working environment or mechanical structure restrictions.

The product is also available in standard straight sleeves, flanged bushings, bushings, and thrust washer gaskets. Can also be customized according to customer requirements.

Technical Parameters:

Static load: 70N/mm2;

Dynamic load: 10N/mm2;

Line speed: 0.15m/s;

Fluid lubrication: 0.25m / s;

Max. PV: 0.8N/mm2*m/3;

Compressive strength: 150N2;

Operating temperature: -40C ~ +400C;

Coefficient of friction: 0.08 ~ 0.20;

Hardness: HB>160.