Add to Cart
DN400-200 500Y SS316L 0.12mm metal plate distillation packing
1. metal plate distillation packing products list (part):
Types of packing | Specific Surface | Void Fraction | Application |
Metal sheet 125X/Y | 125 | 99.5% | High liquid and gas load |
Metal sheet 250X/Y | 250 | 98.8% | Standard |
Metal sheet 350X/Y | 350 | 98.3% | Higher NTSM at lower capacity |
Metal sheet 500X/Y | 500 | 97.7% | High NTSM |
Metal sheet 700X/Y | 700 | 97.0% |
2. Benifits of metal plate distillation packing:
Lower pressure drop through the column
■ Lower botoms temperature for heat sensitive systems
■ Higher relative volatility for difficult separations
■ Lower energy consumption
■ Reduced foaming tendency
Higher efficiency in the same tower height
■ Large number of theoretical stages required
■ Reduced reflux requirement
Higher capacity
■ Reduced vessel diameter
■ Increased operating rates
Excellent liquid spreading characteristics
■ Improved efficiency
■ Offshore applications subject to permanent tilt and motion
Reduced liquid hold-up
■ Smaller amounts of polymer inhibitor
3. metal plate corrugated packing
Corrugated packing is a kind of general structured packing, and most of the structured packing used in industry belongs to this kind. Corrugated packing is a disk-shaped packing composed of many corrugated thin plates. There are two inclination angles of 30 ° and 45 ° between the corrugated plate and the tower shaft. During assembly, the adjacent two corrugated plates are overlapped reversely. Each tray of packing is vertically installed in the tower, and the adjacent two trays of packing are staggered by 90 degrees.
4. What is the role of metal plate distillation packing in high vacuum distillation column?
Distillation is a method to separate liquid mixture with high
purity by using reflux. It is a widely used liquid mixture
separation operation in industry, and is widely used in petroleum,
chemical, light industry, food, metallurgy and other departments.
Distillation operation is classified according to different
methods. According to the operation mode, it can be divided into
continuous distillation and batch distillation; according to the
composition of the mixture, it can be divided into binary
distillation and multi-component distillation; according to whether
the additives affecting the vapor-liquid equilibrium are added to
the mixture, it can be divided into ordinary distillation and
special distillation (including extractive distillation, azeotropic
distillation and salt-adding distillation); if the distillation
process is accompanied by distillation, it can be divided into two
types Chemical reaction is called reactive distillation
In the operation of packed tower, the liquid drops from top to
bottom along the structured packing surface, and the rising vapor
contacts with each other. Therefore, the packing surface is the
place for mass exchange and heat exchange.
Welcome your inquiry about structured packing any time!