Pharmaceutical Industry Sanitary Sample Valve , Aseptic Sample Port Valve 3A TP 304

Pharmaceutical Industry 3A TP 304 Sanitary Sample Valves , Aseptic Sample Port Valve

Application

stainless steel aseptic sampling valves are used in the food, dairy, brewery, winery and many other hygienic industries.

Materials

Materials: AISI-316L
Size: DN8
Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector)

Standard Design

Aseptic sampling valve is made from three parts: valve body, valve head and one piece of diaphragm. A rubber diaphragm valve is put at the axis of valve head, acting as an extensible valve core.

• End connections can be welded, clamped or threaded, only one size DN8 available.
• Handle type: rotary handle, key handle
• Valve open: sampling valve close: sterilization

Sanitary sample valve is a type of valve used in process industries that allows taking a representative portion of a fluid (gases, liquids, fluidized, solids, or slurries) to test (e.g. by physical measurements, chemical analysis, microbiological examination), typically for the purposes of identification, quality control, or regulatory assessment. It is a valve used for sampling.

HYHAU Valves series Sample valves are used in piping systems or on tanks for sampling. It can also be assembled at the bottom of the tank or pipeline for residue drain.

Sanitary Solutions is your source for a T304 Sanitary Sample Valve primarily found in the Beverage, Brewery, Pharmaceutical, Tank and Winery Industries. Our TP304 Sanitary Sample Valve is clamp end with either a 3/8" or 1/2" spout depending on the size needed. As for the surface finish of the valve, our valve is polished to meet sanitary standards.

Technical Specification

Nominal Pressure:

Max. product pressure: 87psi (6bar)

Temperature:

Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.

Material:

Stainless Steel 304,316L or en.1.4301, 1.4404 forged.

Strength:

• Material of stainless steel 316L and 1.4404 is from reputed mill to guarantee the chemical composition and mechanical properties. Material certificate will be submitted follow to orders.
• Forged valve body and disc to control the leakage and visual.
• Superior facilities and good experiences for fabrication.
• In ability to improve and develop new design.
• Fast delivery is possible to meet your needs well in time.
• Low cost from bulk production will reduce your budget and improve your business.
• Small quantity available.

Quality & Inspection:

• PMI test to verify material grade
• Dimension controlling during fabricating and finished
• Visual and surface 100% examination before shipment
• Packed in carton box firstly, then in wooden case
• Third party inspection available.

Kunshan Nyhau Fluid Equipment Co.,Ltd is mainly engaged in the manufacture of stainless steel sanitary valves, fittings and pumps. A team with years of experience in product development, design, production management and quality control.

NYHAU manufactures various types of automatic control valves, diaphragm valves, butterfly valves, check valves, unions, threaded joints, elbows, tees and sanitary fitting valves, vacuum fittings, BPE fittings (SF1/SF4) etc.

NYHAU has advanced imported finishing equipment to provide high quality and clean pipeline fittings for the food, brewing, beverage, biotechnology, pharmaceutical, fine chemical, electronics, and cosmetics industries.

NYHAU has won high recognition from domestic and foreign customers with its internationally advanced technology and technology, complete product range and fast and accurate coordination capabilities.

NYHAU has many years of cooperation with OEM/ODM global group customers and first-line brand customers, and is still in continuous cooperation.