

Add to Cart
DCG series Residual current circuit breaker(without over-current
protection) is suitable for the line of A and S 50/60Hz, voltage
240V(2pole)/415V(4pole), rated current up to 63A.When there is
human electricity shock or if the leakage current of the line
exceeds the prescribed value, it will cut off the power rapidly to
protect human safety and prevent the accident due to the current
leakage.It can be used as infrequent changeover of the line in
normal situation.It is applicable to industrial site, commercial
site, tall building and civil house.
It complies with standard of IEC/EN61008.1 and GB16916.1.Each phase
of conductor at the circuit breaker passes through the
zero-sequence current transformer, and the secondary side of coil
connects with the electromagnetic tripper.Under normal condition,
the vector sum of each phase of current passing through
zerosequence current transformer is zero.The flux of the
zero-sequence current transformer is zero.And the secondary output
voltage is zero and the circuit breaker doesn't zero, and the
zero-sequence current transformer would produce the magnetic flux,
and the secondary side of coil would output the voltage.Once the
leak current increases to drive the output voltage at the secondary
side to grow to certain level, the electromagnetic release would
activate to drive the operation mechanism to act to break the
contact that connects the power, finally to realize the leak
protection.
Newest type GE DCG RCCB
Application:
1. For protection against risk of fire due to live to earth fault
where fault current is insufficient to cause over-current
protection device to operate
2. For protection against risk of shock from indirect contact with
equipment suffering a live to earth fault.
3. For protection against shock in potentially hazardous
environment
4. As supplementary protection against shock from directly touching
live parts
Note: An RCCB must not be used as the sole means of protection
against touching live parts
Specification:
Rated working voltage: 240/415V
Rated frequency: 50/60Hz
Rated working current: 16, 20, 25, 32, 40, 50, 63, 80, 100A
Rated residual operating current: 0.03, 0.1, 0.03A
Sensibility: AC Type
Model NO. CGE RCCB Breaking Capacity Low Voltage Circuit Breakers Operation Electric Type Speed Normal Type Circuit Breaker Arc-extinguishing Medium Air Installation Fixed Structure Conventional Circuit Breaker Certification CE Body Material PA66 The Inside Parts IEC Standard Accessaries Type Circuit Breaker Function Overcurrent Protection Trademark Fenigal/OEM Specification IEC1008, GB16916, BS EN61008 Origin China Wenzhou |