

Add to Cart
New dc Return Pump With Sine Controller for Coral Reef Fresh Tank Sump Skimmer
Paramerter
Model | Power(W) | H-max(M) | Max-flow L/H | Hose Size mm | Voltage |
XDC3500 | 25 | 4 | 3500 | 8.5 | 24V |
XDC4500 | 35 | 4.5 | 4500 | 8.5/13 | 24V |
XDC5500 | 45 | 5 | 5500 | 8.5/13 | 24V |
XDC7000 | 50 | 6 | 7000 | 8.5/13 | 24V |
XDC8500 | 60 | 6.5 | 8500 | 16/19/25 | 24V |
XDC10000 | 85 | 7.5 | 10000 | 16/19/25 | 24V |
XDC12000 | 85 | 6 | 12000 | 16/19/25 | 24V |
XDC15000 | 120 | 6 | 15000 | 16/19/25 | 24V |
Features:
Apply to ponds, rockey, bourn, aquarium tanks and seafood tanks
with water recycling equipment matching.
Novel design and generous, use the variable frequency technology;
Small power, large flow, high head, super silence and amphibious
Use ceramic shaft, wear resistance, no rust, , lng service life;
Both fresh and seawater, do not contain copper element;
This product realize free tool demolition, easy to clean.
The outlet realize multistage over, suitable for a variety of pipe
dia connection;
The locked-rotor protection function (immediately cut off power
after water leaf card dead)
Description
SMART CONTROLLER:
Constant Flow Mode:When the dc Pump is switched on,the LCD screen
on the controller will display between “101” and “120” .namely that
the water pump enters into the constant FLOW mode With 20 different
speed settings, To increase the speed of the pump press “+” until
you reach the required level (maximum FLOW will be displayed on the
LCD screen as 120,To decrease speed press “ - ”,Minimum flow
display "101",users can adjust the flow by the actual demand.
Wave function (mode): When the number between “201” and “220” can
be displayed on the controller, There is a total of 20 bands that
you can press the "+" and "-" buttons to adjust wave bands. When
the number is 201, you can get the fastest wave band. When it is
220, you can get the maximum wave band. The wave mode is designed
on the sudden difference between the amount of supply water and the
maximum amount of water to achieve . Note: when switching to wave
function(mode) via the “MODE” button, the starting water of the
constant flow mode is set between “101” and “115”, and the effect
of the pulse mode is more obvious.
Feed Mode: Press “ fish ” to pause pump operation for 10 minutes.If
you wish to restart the pump before the end of the 10 minute pause,
press “ fish ” again and the pump will restart.