The Most Safety Operation
Instructions
How to adjust temperature:
There is a regulator connect with power cord, just press the button
after heater has been installed,
and you can will see the LED display shows °F,
press the button until you see the display shows your expecting
temperature (display 59~93℉ in cycle by),
and then leave it for heating up.
For example:
Expecting temperature is : 80℉ Heater display shows: 70℉ Then,
Press the regulator 10 times,
then you will see the display shows from 70 to 80°F.
When you see the display shows 80°F,
then leave it for heating.
Attention:
1. The heater must be fully submerged in water, or it will cause
the malfunction of the product 2. The power socket should be set
higher than the sink
3. Be sure to use the heater under specified voltage
4. Make sure to unplug the power before any cleaning, maintenance
or moving of the heater, and make sure it has been cooled down for
at least 5 minutes
5. Do not use the heater if the power cord and plug is damaged
6. Do not insert or pull the plug with wet hands, electric shock
may be caused
Details:
Model | FS-28 |
Power | 50W |
Color | Black |
Suitable tank size | 1-10 gallon fish tank |
Power supply | Electric |
Cable length | 1m |
Material | ABS Plastic Shell |