

Add to Cart
Aquarium Heater with Digital Temperature Controller Submersible Fish Tank Heater
About This Item
Intelligent digital display and precise temperature control
The fish tank heater controller is equipped with a high-tech smart
chip, which can accurately control the temperature of the heating
rod. Press and hold the button on the side of the controller for
3-5 seconds, and you can freely switch between Fahrenheit and
Celsius.
Product Description
【External Digital Display Controller】With its easy-to-use LED
digital screen simultaneously displays the set temperature and the
current aquarium temperature. You’ll be able to set temperature up
in a healthy range of 59 to 93°F with button and monitor how well
the heater is doing its job in real-time.
【Double Tubes Heating Element】Featuring shatterproof quartz glass
tube + nickel-chromium heating wire for fast, steady, more evenly
distributing heat. With a PC plastic guard to protects your fish
touch it they won’t get burnt.
【Running-Dry Shut Off Protection】This is a completely submersible
heater that will stop working when exposed to air and display error
code "E1", which resets itself to resume working when placed back
into the water.
【Overheating Protection】This fish tank heater automatically turns
off and displayed “HH” error code once the water temperature
reaches 95°F. Until it drops to the set temp. Accurate temperature
controls within 1°F difference.
【Works in both Freshwater and Saltwater Tank】The 500 watt heater
can be used to heat for a 65-120 gallon aquarium. The package
included two suction cups that easily installed vertically or
horizontally underwater below 5 inch.
Product Parameters
Compatible Devices | fish tank , aquarium tank , small pond |
Controller Type | Push Button |
Material | Polyresin |
Size | 50W(2-8 gallons) |
Special Features | Heating , Underwater , Adjustable |
Specific Uses For Product | Adjustable temperature , built-in thermometer , constant the water temperature , dual LED display , small size, easy to hide in mini tank |
Tank Volume | 8.00 gallons |
Note
1. Please unplug the heater and let it cool for 15 minutes first
before you perform a water change or take out the heater rod.
2. The heater must be fully submerged underwater at least 5inch all
the time, the plastic guard will be melted if the heater exposes to
the air when it's heating or not cooling down.
3. Keep water in circulation for better distribution of the heat.
4.It’s essential to keep it off the gravel or sand as the
difference in heat conductivity between the water and substrate
could result in the heater glass cracking.
5. To avoid the device overheating and insure its better
performance, it’s better to put it close to the tank filter.
Product Display