

Add to Cart
HY11P52B HY11P Series: 8-bit Mixed Signal Microcontrollers with Embedded High Resolution ΣΔ ADC
Model No. | VDD | Internal Clock | System Clock | Program Memory (word) | Data Memory (byte) | Built-in EPROM (word) | ADC ENOB (bit x ch.) | Sample Rate | TPS | OPAMP (type x ch.) | RTC | LCD (com x seg ) | I/O | Timer | PWM | Serial Interface | Package | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8-bit | 16-bit | |||||||||||||||||
HY11P12* | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 2k | 128 | – | 20-bitx4 | 8sps~ 977sps | Y | – | Y | 4×12 | 4xI +10xIO | 1 | – | – | – | LQFP 44 |
HY11P13 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 4k | 256 | – | 20-bitx8 | 8sps~ 977sps | Y | LNAx1 | Y | 4×20 | 4xI +10xIO | 2 | 1 | 8-bit x1 | SPI | LQFP 64 |
HY11P14 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 8k | 512 | – | 20-bitx8 | 8sps~ 977sps | Y | LNAx1 | Y | 4×29 | 4xI +10xIO | 2 | 1 | 8-bit x1 | SPI EUART | LQFP 64 |
4×40 | 8xI +20xIO | 8-bit x4 | LQFP 100 | |||||||||||||||
HY11P23 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 4k | 256 | – | 20-bitx8 | 8sps~ 977sps | Y | LNAx1 | Y | – | 10xI +12xIO | 2 | 1 | 8-bit x1 | SPI EUART | LQFP 32 QFN 32 |
7xI +12xIO | SSOP 28 | |||||||||||||||||
HY11P24 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 8k | 512 | – | 20-bitx8 | 8sps~ 977sps | Y | LNAx1 | Y | – | 18xI +20xIO | 2 | 1 | 8-bit x4 | SPI EUART | LQFP 44 LQFP 48 |
HY11P32* | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 2MHZ | 2k | 128 | 64 | 20-bitx3 | 8sps~ 977sps | – | – | – | 4×12 | 4xI +8xIO | 1 | – | – | – | LQFP 44 LQFP 48 |
HY11P33 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 4k | 256 | 64 | 20-bitx3 | 8sps~ 1953sps | – | – | Y | 4×20 | 4xI +8xIO | 2 | – | 8-bit x1 | – | LQFP 64 |
HY11P35 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 6k | 256 | 64 | 20-bitx8 | 8sps~ 977sps | Y | LNAx1 | Y | 4×32 | 12xI +14xIO | 2 | 1 | 8-bit x4 | – | LQFP 100 |
HY11P36 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 4k | 256 | 64 | 20-bitx3 | 8sps~ 1953sps | – | – | Y | 4×32 | 4xI +8xIO | 2 | – | 8-bit x1 | – | LQFP 64 |
HY11P41 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 2MHZ | 2k | 128 | 64 | 20-bitx4 | 8sps~ 1953sps | Y | – | – | – | 6xI +5xIO | 2 | 1 | 8-bit x1 | – | SSOP 16 SOP 16 QFN 16 |
HY11P42 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 2k | 128 | 64 | 20-bitx7 | 8sps~ 977sps | Y | – | Y | – | 7xI +8xIO | 2 | – | 8-bit x1 | EUART | SSOP 28 |
7xI +12xIO | TSSOP 28 QFN 24 | |||||||||||||||||
HY11P52* HY11P52B* | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 2MHZ | 2k | 128 | 64,LV | 20-bitx3 | 8sps~ 1953sps | – | – | – | 4×12 | 4xI +8xIO | 1 | – | – | – | LQFP 48 |
HY11P54 | 2.2V~ 3.6V | 28KHZ 2MHZ | 28KHZ~ 8MHZ | 8k | 256 | 64,LV | 20-bitx7 | 8sps~ 1953sps | – | LNAx1 | Y | 4×32 | 9xI +9xIO | 2 | – | 8-bit x1 | EUART | LQFP 64 |
20-bitx8 | 4×32 | 13xI +12xIO | LQFP 100 | |||||||||||||||
20-bitx8 | – | 11xI +11xIO | QFN 48 |
VDD | Internal Clock | System Clock | Program Memory (word) | Data Memory (byte) | Built-in EPROM (word) | ADC ENOB (bit x ch.) | Sample Rate | TPS | OPAMP (type x ch.) | RTC | LCD (com x seg ) | I/O | Timer | PWM | Serial Interface | Package | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8-bit | 16-bit |
Remark:
ADC:24-bit Sigma Delta ADC.
OPAMP:LNA (Low Noise Amplifier).
TPS:Internal temperature sensor.
RTC:Support external 32768Hz crystal or 450KHz~8MHz ceramic
resonator or 1MHz~8MHz crystal oscillator
Timer:Timer A(8-bit) support multi-segment interrupt time setting;
Timer B(16-bit) support Capture Compare function;
Timer C (8-bit) support PWM / PFD function.
*:H08B instruction, the main difference is that the instruction set
does not contain 8×8 hardware multiplier, 16-bit table
read instruction, conditional skip instruction and stack
manipulation instructions.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons.
If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your MOQ?
A: We provide you small MOQ for each item, it depends your specific order!
Q3. Do you test or check all your goods before delivery?
A: Yes, we have 100% test and check all goods before delivery.
Q4: How do you make our business long-term and good relationship?
We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them,It's not something that can be replaced.
Q5: How to contact us?
A: Send your inquiry details in the below,Click "Send"Now!!!
Shenzhen Hongxinwei Technology Co., Ltd
To adopt new technology,to produce products of quality,to offer high-class service.
Improve the management system continuously to meet customer requirement for high-quality products and services.
Why choose us?