Smart 600W Hybrid Wind And Solar Charge Controller 48V 235x148x84 Mm
Brand Name:URILIC
Certification:UL,CE,RoHS,ISO9001
Model Number:600W
Minimum Order Quantity:Negotiation
Delivery Time:5-15 days
Payment Terms:T/T
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
No.7, Aimin Road, Hourui Community, Hangcheng Street, Baoan District, Shenzhen, China
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
Wind And Solar Hybrid Controller 600W 48V Battery Charge Controller
Smart
Description:
The wind and solar hybrid controller 600W 48V has been condensed
for many years of application experience (such as waterproof,
dustproof, salt spray, operational wiring error, fan wind limit
control, energy management, etc.), regardless of the application to
charge control, or street light control, each performance is
excellent. In order to cooperate with various applications, the
controller adopts layering and building block structure. All
functions can be combined with different function boards according
to the actual application, which is convenient for quick
customization and suitable for application.
Design Features:
Waterproof
The circuit board has three anti-treatment and layered structure
design, even if a small amount of water enters, it will not damage
the equipment.
Easy wiring
The injection molding process is adopted at the terminal, and the
phenomenon of short circuit and wire contact does not occur, making
it easier for the customer to operate.
Photovoltaic board reverse connection will automatically alert
prompt
The input end of the photovoltaic panel will not be damaged
continuously, and there will be a buzzer warning prompt. Special
construction at night will not cause wiring errors (Note: The
reverse connection detection at night wiring requires manual button
intervention).
Fan steady speed power generation control technology
The fan steady-speed power generation control method can make the
fan not run at super-speed. In strong winds, the fan can control
continuous power generation at a set speed to avoid direct braking
of the fan due to stall caused by strong wind. Greatly increase the
power generation of the fan and keep the fan running normally.
Fan input MPPT power generation technology (boost type)
The wind and solar hybrid controller can provide automatic fan
input upper limit power tracking mode, or 5-segment matching curve
input configuration mode (input speed vs. input current; or input
voltage vs. input current curve), which can greatly reduce the
fan’s low wind speed efficiency. Power generation.
Statistics on cumulative power generation, remaining power, speed,
current, temperature, etc.
The controller screen has conventional fan, photovoltaic, battery,
output current, voltage, power display, as well as fan,
photovoltaic cumulative power generation display, and battery
residual power display, fan speed, unloading current display. The
temperature of the controller is displayed.
Product Details:
Battery parameters | |
|---|---|
Applicable battery voltage | 48V |
Battery protection method | Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load) |
Overvoltage protection point voltage | 58.0V±0.3V |
Overvoltage recovery point voltage | 55.0V±0.3V |
Undervoltage protection point voltage | 42.0V±0.3V |
Undervoltage recovery point voltage | 46.0V±0.2V |
Battery temperature compensation | 5mv/°C/2V (available) (optional) |
Wind turbines input port parameters | |
Applicable wind turbine rated power | 600W |
Port rated current | 15A dc (after rectification) |
Port maximum input current | 20A dc (after rectification) |
Wind turbine speed limit power generation preset speed | 500 Rpm (can be set) |
Wind turbine current limiting power generation preset current | 15A (can be set) |
Wind turbine protection method | Overspeed protection, overcurrent protection, inductive lightning protection |
Unloading method | PWM stepless high frequency soft unloading (built-in) |
MPPT function | Boost MPPT mode (automatic tracking or 5-band curve tracking) |
MPPT channel input current | 12A |
PV input port parameters | |
Applicable PV rated power | 720W/48V (standard) |
Port rated input current | 15A (standard) 30A (optional) |
Charging voltage drop | <0.2V |
Photovoltaic Protection Method | Reverse protection (voice reminder) |
Unloading method | Open unloading |
Discharge output port parameters | |
Outputs | 2-way standard output/PWM mode is 1-channel dimming output |
Every output current | 12A |
Output protection method | Overcurrent protection (15A/30 seconds 18A/0.4 seconds), short circuit protection (current > 150A) |
Output control method | Light control, time control, hold output, reverse output, PWM output (250HZ only on the 2nd road) |
Other | |
Accessibility | Controller internal air temperature monitoring, unloading component temperature monitoring, fan MPPT Component temperature monitoring, controller terminal upside down installation inversion monitoring (voice reminder) |
Display mode | Liquid (LCD) display |
Communication method | RS232 (5V level), RS485 (standard) / short-range wireless RF (optional) |
Parameters that can be displayed | Fan input voltage / current / power / power generation / speed / unloading current PV input voltage / current / power / power generation Battery voltage / charging current / power / total charge / battery status information 2 output ports output current / power / abnormal information |
Standby power consumption (screen backlight off) | About 20ma / (12 ~ 24) V system |
How to operate | 3M foil button operation (4 buttons) |
Working temperature and humidity range (environment) | -40~+80°C/20~85%RH (but no condensation) |
Protection level | IP41 |
Controller size (length * width * height *) | 235mm*148mm*84mm |
Net weight | 2.5KG |
Application:
Smart 600W Hybrid Wind And Solar Charge Controller 48V 235x148x84 Mm
Inquiry Cart
0