ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application

GYFTCY83 All dielectric Self-supporting ADSS fiber optic cable used for aerial anti-Rodent application

Description

The structure of the optical cable is to insert a 250 μm optical fiber into a loose tube made of a high modulus material, and the loose tube is filled with a waterproof compound. The center of the core is an FRP non-metallic reinforcement. The structure needs to be in the outer layer of the MDPE material. The sleeve is twisted around the center to form a compact and round core. The gap in the core is filled with water. The material is covered with a water blocking tape, and a layer of FRP stranded wire is coated on the outside, and a layer of LSZH low-smoke halogen-free PE sheath is extruded to form a fiber optic cable.

Cable Cross-section diagram

Technique Parameters

3.2 Fiber coding,The color coding of the optical fiber shall be in accordance with Table 3.2.1

Table3.2.2:Identification of optical tube

Table3.2.3:Make-up of cable, No. of Fibers in each Tube

4. TEST REQUIREMENTS

Features:

• Suitable for use on distribution and high voltage transmission lines
• Requires no messenger wire -- fully self-supporting
• Single pass installation -- no messenger, no lashing wire -- faster and lower cost
• Cable is water-blocked using dry core technology, therefore no messy flooding compounds
• Design details for span lengths up to 1500ft (457m) and fiber counts up to 432
• Custom designs available for larger span lengths or other fiber counts
• Full line of attachment hardware available for a "system" solution
• Track-resistant outer jacket available for installations on high voltage lines where space potentials reach up to 25kV
• Gel-filled buffer tubes are S-Z stranded for easy mid-span access

Application

• Utilized for telecommunications by power utilities, telcos, and private network groups
• Designed for installation on distribution and transmission lines
• Capable of being installed in close proximity to conductors if security is a concern
• Suitable for underbuild applications, minimizing the need for outages
• Used for telecom networks where quick, low-cost installation is a priority

Shenzhen Zhaoxian Special Optical Cable Fiber Technology Co., Ltd. was established in 2015 with a registered capital of 10 million RMB.The company is located in Xunbao Industrial Park, Kuichong Street, Dapeng New District, Shenzhen Canton, China. It has a plant area of 10,000 square meters and be equipped with advanced fiber optic cable manufacturing facility.The main business is optical fiber and optical cable manufacturing, optical communication equipment processing, optical fiber communication technology development and services. Products are widely used in Communications operator, radio and television, national,grid,military,traffic, mining and other communications, and have been trusted by users for quality and service. The company's products comply with the international, domestic and industry quality standards corresponding to ITU, IEC, GB/T, YD/T, and effectively run the I S O 9 0 0 1 international quality management system certification to ensure excellent product quality, stability, continuity, and traceability. The company's production and technical team are all experts and production craftsmen who have been engaged in the fiber optic cable manufacturing industry for many years, and have extensive cooperation with many domestic communication colleges and universities, and carry out technical exchanges and joint research and development of products. We always firmly believe that quality is the life of an enterprise. We continue to develop products, improve technology, and improve equipment. At the same time, we have successively obtained a number of new utility patents and computer software copyrights.