Details

1. PLATING

1.1) Plunger: Brass C3604,3~50 micro inch Au over 50~120 micro inch Ni;

1.2) Barrel: Brass C3604,3~50 micro inch Au over 50~120 micro inch Ni;

1.3) Spring: SUS304, 1~3 micro inch Au;

2. Rated voltage (Per Contact): 12 V;

3. Rated Current (Per Contact): 1.0A-3.0A;

4. Insulation Resistance: 100MΩ Minimum;

5. Dielectric Withstanding Voltage: 100VRMS AT 60HZ;

6. Contact Resistance: 50 mΩ maximum before test and 60mΩ maximum after test at Pogo pin working stroke;

7. Recommended Working Stroke & Force:

7.1) Spring Force:>=30gf ;

8. Mechanical life:

8.1) Mechanical life: 30000 Cycles;

9. Working Temperature Range:-30~85℃;

10. Salt Spray: 48hours;

Feature

• - Available 0.5A per pin
• - Working Height: 2.05mm ~ 2.55mm
• - Spring Force: 0.5N or 0.6N
• - Tube Bottom Diameter: 2.1mm

Basic Specifications

Advantage
– Ball strucutre to protect spring from high current.
– Thru-hole tail for secure soldering.
– Solder-cup tail for wire attachment. (Recommended AWG19 or greater)

What is Pogo pin?

Pogo Pin is spring loaded probe which is made by precision instruments with riveting workmanship. It usually consists of plunger, tube and spring.

Pogo pin is generally applied in the precision connection inside the electronics products such as mobile phones, communication devices, automotive, medical devices, aerospace devices and so on. Since pogo pin is very fine probe, it can make the finished connector light in weight, small in size and exquisite in look when it’s applied in a precision connector.