

Add to Cart
20 inch foldable strong beach electric fat bike for girls
1. The height of the saddle and the handlebar should be adjusted
before using the electric bicycle to ensure the comfort of riding
and reduce fatigue. The height of the saddle and the handlebars
should vary from person to person. Generally, the height of the
saddle is suitable for the rider to be able to reliably land on one
foot (the whole vehicle should be kept upright), and the height of
the handlebar is flat on the cyclist's arm and shoulder. Relax with
your arms. However, the adjustment of the saddle and the handlebar
should first ensure that the pipe and the insertion depth of the
riser must be higher than the safety mark line.
2. Before and after using the electric bicycle, check the front and
rear brakes. The front brake is controlled by the right brake and
the rear brake is controlled by the left brake. The adjustment of
the front and rear brakes can be reliably braked when the left and
right brake handles reach half the stroke; the brake shoe is
excessively worn and should be replaced in time.
3. Check the tightness of the chain before the electric bicycle is
used. The chain is too tight when riding on the ankle. If it is too
loose, it will easily vibrate and rub against other parts. The sag
of the chain is 1-2mm, which is suitable, and can be properly
adjusted when riding without the ankle. When the chain is adjusted,
first loosen the rear wheel nut, and then screw out the left and
right chain adjustment screws evenly to adjust the chain tightness
and retighten the rear wheel nut.
4. The lubrication of the chain should be checked before using the
electric bicycle. Feel and observe whether the chain chain of the
chain is flexible or not, and whether the chain rust is serious. If
the corrosion or rotation is not flexible, the right amount of
lubricant should be added, and the chain should be replaced
seriously.
5. Before riding an electric bicycle, check the tire pressure, the
steering flexibility of the handlebar, the flexibility of the front
and rear wheels, the circuit, the battery power, the working
condition of the motor, and whether the lighting, horn, and
fasteners meet the requirements for use.