Mitsubishi A68DAI-S1 PLC MODULE MELSEC-A SERIES ANALOG OUTPUT 8 CHANNEL CARD MOUNT NEW AND ORIGINAL GOOD PRICE

Mitsubishi A68DAI-S1 PLC MODULE MELSEC-A SERIES ANALOG OUTPUT 8 CHANNEL CARD MOUNT NEW AND ORIGINAL GOOD PRICE

Descriptions

MITSUBISHI A68DAI-S1 Product information and technical parameters:
Brand: MITSUBISHI
Name: Analog output module
Model: A68DAI-S1
8 channels.
Input: DC0 ~ 20mA.
Output (resolution): 0 ~ 4000/0 ~ 8000/0 ~ 12000.
Transform speed: 40ms/8.
38 point terminal station.
Input status and input information input from the input interface,
CPU will be stored in the working data memory or in the input image register.
And then combine the data and the program with CPU.

The result is stored in the output image register or the working data memory,
And then output to the output interface, control the external drive.
PLC selection with the development of PLC technology, more and more types of PLC products,
Function is becoming more and more perfect, and its application is more and more extensive.
Different series of different models of PLC has different performance, applicable occasions also have different emphasis,
Price also has a greater difference. Therefore PLC selection,
Under the premise of meeting the control requirements,
Should consider the best performance to price ratio, a reasonable choice of PLC.

The working process of the input interface circuit: when the switch is closed, the diode light,
The transistor is then guided to the internal circuit and input signal under the irradiation of the light.
When the switch is off, the diode does not emit light, and the transistor is not on the way. Internal circuit input signal.
It is through the input interface circuit to the external switch signal into PLC internal can accept the digital signal.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.

Input points: 32 points.
Input voltage: DC12V/DC24V.
Current: 3/7mA.
Response time: 10ms.
16 points / a common end.
Positive pole sharing.
50 point terminal station.

System program memory for storing system program,
Including management procedures, monitoring procedures, as well as the user program to do the compiler to compile the process of interpretation MITSUBISHI A68DAI-S1.
Read only memory. Manufacturers use, content can not be changed, power does not disappear A68DAI-S1
PLC selection with the development of PLC technology, more and more types of PLC products,
Function is becoming more and more perfect, and its application is more and more extensive.
Different series of different models of PLC has different performance, applicable occasions also have different emphasis,
Price also has a greater difference MITSUBISHI A68DAI-S1. Therefore PLC selection,
Under the premise of meeting the control requirements,
Should consider the best performance to price ratio, a reasonable choice of PLC.

Each scanning process. Focus on the input signal sampling. Focus on the output signal to refresh.
Input refresh process. When the input port is closed,
Program in the implementation phase, the input end of a new state, the new state can not be read MITSUBISHI A68DAI-S1.
Only when the program is scanned, the new state is read.
A scan cycle is divided into the input sample, the program execution, the output refresh.
The contents of the component image register are changed with the change of the execution of the program.
The length of the scan cycle is determined by the three.
CPU the speed of executing instructions.
Time of instruction.
Instruction count.
Due to the adoption of centralized sampling.
Centralized output mode.

There exist input / output hysteresis phenomena, i.e., the input / output response delay. Input unit (encoder, pulse generator) (NSD servo system)
Each scanning process. Focus on the input signal sampling. Focus on the output signal to refresh.
Input refresh process. When the input port is closed,
Program in the implementation phase, the input end of a new state, the new state can not be read.
Only when the program is scanned, the new state is read.
A scan cycle is divided into the input sample, the program execution, the output refresh.
The contents of the component image register are changed with the change of the execution of the program.
The length of the scan cycle is determined by the three.
CPU the speed of executing instructions.
Time of instruction.
Instruction count.
Due to the adoption of centralized sampling.
Centralized output mode.

There exist input / output hysteresis phenomena, i.e., the input / output response delay.
PLC selection with the development of PLC technology, more and more types of PLC products,
Function is becoming more and more perfect, and its application is more and more extensive.
Different series of different models of PLC has different performance, applicable occasions also have different emphasis,
Price also has a greater difference. Therefore PLC selection,
Under the premise of meeting the control requirements,
Should consider the best performance to price ratio, a reasonable choice of PLC A68DAI-S1.

System program memory for storing system program,
Including management procedures, monitoring procedures, as well as the user program tto do the compiler to compile the process of interpretation A68DAI-S1.
Read only memory. Manufacturers use, content can not be changed, power does not disappear.

MORE INFORMATION

DELIVERY

Logistic partners UPS, FedEx and DHL

International delivery available

Same day dispatch from group stock

WARRANTY

All parts new are covered by Shenzhen Viyork 12 month warranty

RETURNS

No hassle returns policy

Dedicated customer support team

PAYMENT

Trade credit

We understand that credit is a necessary part of business and offer credit agreements on request, subject to status.

Payment options

We accept Bank transfers and the following methods of payment:

Western Union PayPal VISA

Shenzhen Viyork technology co., LTD. engage in professionally sales industrial automation (DCS, PLC, Redundant fault-tolerant control system,Robotic system) spare parts.

We can offer these advantage products: Mitsubishi, Yaskawa,Pansonic, Ovation, Emerson,Honeywell,Allen - Bradley, Schneider, Siemens, ABB, GE Fanuc, Rosemount and Yokogawa transmitter and so on.

The efforts of all the employees in the company and the support of the customers and the same profession,Our business rapidly expand throughout China and around the world, quickly became the industrial automation rising star, here, thanks to the customers long-term support, We will focus more for your attention.

Our advantage produts:

And so no....

Any inquiries,pls let me know.

I will give you the best price.