60 Measuring Points Test Corners 60cm Matt Black Painted Plywood
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN1102-60CM60P
Minimum Order Quantity:1
Delivery Time:1 Month
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC60335-1 60 Measuring Points Test Corners 60cm Matt Black Painted Plywood
Equipment Overview:
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 11.
The test corners are mainly used to provide environmental conditions that meet the standard requirements for temperature rise testing of various electrical and electrical products.
The test corners with different distribution specifications, numbers of temperature measuring points and external dimensions can be customized according to the actual tested samples.
Test Principle:
Thermocouples used for determining the temperature rise of the surface of walls, ceiling and floor of the test corner are attached t the back of small blackened disks of copper or brass, 15mm in diameter and 1mm thick. The front of the disk is flush with the surface of the board. The thermocouples are connected to the temperature measurement instrument to monitor the temperature at each point in real time.
Technical Parameters:
| Dimensions | WDH=600X600X600mm Other dimensions can be customized |
| Thermocouple | American original OMEGA thermocouple with diameter less than 0.3mm, type K |
| Thermocouple Arrangement | All lead to the terminal block |
| Temperature Measurement Copper | 15mm diameter, 1mm thick brass sheet, the front surface of the round copper sheet is flush with the surface of the plywood |
| Temperature Measurement Points | 20 points per each surface, total 60 temperature measuring points |
| Temperature Measurement Point Arrangement | 100×100mm square distribution, can be customized 76×76mm or 50×50mm |
| Plywood | 20mm thickness, matte black paint on the front and gray film on the back |
| Structure | 1 base plate, 2 side plates |
| Optional | Temperature measurement instrument |
Structure:
It consists of 20mm thick plywood boards coated with matt black paint, with temperature measuring copper on its surface, and thermocouple connected to the terminal block. The size of the plywood and the number of temperature measurement points can be customized.
60 Measuring Points Test Corners 60cm Matt Black Painted Plywood
Inquiry Cart
0