IEC 60529 IPX3/4 Spray Nozzle With Digital Flowmeter IP Test Equipment
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN446B
Minimum Order Quantity:1
Delivery Time:3 Days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC 60529 IPX3/4 Spray Nozzle with Digital Flowmeter IP Test Equipment
Overview:
The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.
It meets the requirements of IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4, Figure 5.
Technical Parameters:
| Parameters of Spray Nozzle | Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch , total 121 holes of Ф0.5mm, made of brass. |
| Required Water Flow | 10L/min±5% |
| Pressure | 50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa |
| Moving Shield | Made of aluminum, can be detachable |
| Flowmeter | 8L/min ~120L/min, digital display |
Structure:
This device is manufactured according IEC 60529 figure 5, with a digital flowmeter and a pressure gauge on the handle, it can achieve IPX3 / IPX4 hand-held spraying test by connecting water pipe (water pipe should be prepared by user).
It ensures that the water spraying and splashing speed reaches the standard required value by controlling the water supply flow, make the enclosure of the specimen to be splashed in all directions.
IEC 60529 IPX3/4 Spray Nozzle With Digital Flowmeter IP Test Equipment
Inquiry Cart
0