IEC 61000-4-12 Ringing Wave Signal Test Generator EMC Tester In Low Voltage Power Lines
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN6616
Minimum Order Quantity:1
Delivery Time:20 work days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC 61000-4-12 Ringing Wave Signal Test Generator EMC Tester In Low Voltage Power Lines
Product overview:
Ringing signal generators are used to simulate non-repeated damped
oscillatory transients in low voltage power, control and signal
lines in public and private networks. It provides an ideal standard
basis for assessing the immunity of electrical and electronic
equipment for domestic, commercial and industrial use.
This ringing signal generator complies with IEC 61000-4-12/ GB/T
17626.12 "Electromagnetic Compatibility (EMC) - Test and
Measurement Techniques - Oscillating Wave Immunity Tests" and
ANSI-C62-41 "IEEE Guide to Surge Voltages in Low Voltage
Alternating Current (AC) Power Supply Circuits", as well as with
the requirements of IEC 61009-1, clause 9.19.1, among others.
Transients due to power and control switching (or lightning
triggering) can produce ringing wave interference on power, control
and signal lines. A common standard has been developed for
assessing the immunity of electrical and electronic equipment for
domestic, commercial and industrial use.
Technical parameters:
Open Circuit Voltage Oscillation Frequency (1/T) | 100kHz±10% |
Open Circuit Output Voltage (PK1) | (250V~4000V)±10% |
Open Circuit Voltage Waveform Front (T1)(10%~90%) | PK1:0.5μs±30% |
| 40%<(PK2)/(PK1)<110% |
40%<(PK3)/(PK2)<80% | |
40%<(PK4)/(PK3)<80% | |
Short Circuit Current Wave Front (T2) (10%~90%) | P1 ≤0.9μs |
Short Circuit Current (PK1) at 3500V | 292A ± 10% at 12Ω |
Short Circuit Current (PK1) at 3500V | 117A ± 10% at 30Ω |
Adjacent Pulse Interval | 1s~99s |
Number of Pulses | 1~9999 times |
Output Method | Automatic positive and negative polarity switching or alternation |
Output Impedance | 12Ω, 30Ω |
Phase Injection Method | Asynchronous or synchronous (0°~360°) |
Sample Coupling / Decoupling Network | Optional coupling/decoupling network with lightning surge generator |
Structure:
7-inch touchscreen LCD interface with rich features for easy
operation and software upgrades
Built-in single-phase 10A (16A) power supply network, two-in-one,
compact design.
The EUT output comes with a high-strength panel socket, which makes
the connection of test samples more convenient and reliable.
Built-in EUT operating voltage, current monitoring, over-voltage
and over-current protection.
Intelligent programme-controlled high-voltage power supply with
built-in high-voltage over-voltage, over-current and short-circuit
protection.
Intelligent detection of ringing wave output, with voltage error
and no output warning function
Self-diagnostic function, can intelligently judge the abnormal
output of high voltage and ringing wave.
The main switch adopts imported switches to ensure stable
waveforms, strong comparability and long life.
Waveforms are displayed by external oscilloscope (the oscilloscope
needs to be prepared by the user)
IEC 61000-4-12 Ringing Wave Signal Test Generator EMC Tester In Low Voltage Power Lines
Inquiry Cart
0