IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Tester PLC Control
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN1113L
Minimum Order Quantity:1
Delivery Time:30 Days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Tester PLC Control
Product information:
The Cord Anchorage Force and Torque Test Equipment is designed and manufactured according to the standard requirements of IEC60884-1 clause 23.2, IEC60745-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc.
The tester is used to conduct two tests of tension and torque at the terminals of appliances (lamps) with power cords, appliances intended to be permanently connected to fixed wiring with flexible cords, and power cords such as household appliances, medical equipment, etc.
The test method is to make a mark at the position of the wire sample 20mm from the fixing device, gently apply the tension 25 times (or the number of times required by other standards) at a rate of 1 time/second, and apply a torque near the exit of the appliance for 1 minute. After the test, the displacement of the marking position of the wire shall not exceed 2mm.
Technical Parameters:
| Standard | IEC60884-1 Clause 23.2 |
| voltage | 220V(AC)50Hz |
| Electric control method | PLC+ touch screen |
| Drive method | Motor and electromagnet drive |
| Test station | Single station, vertical and horizontal cannot be tested at the same time |
| Sample clamping method | Mechanical clamping, clamping point height can be adjustable |
| Tensile weight | 10N: 1 PC, 20N: 3 PC, 30N: 2 PC (The tester can test the tensile weight of 30N, 40N, 60N, 80N, 100N, and 120N) |
| Tension application method | Horizontal or vertical (optional) |
| Torque weight | 4N, 5N, 7.5N, 12.5N, 17.5N, 21.25N (The tester can test the torque weight of 0.08N∙m, 0.1 N∙m, 0.15 N∙m, 0.25 N∙m, 0.35 N∙m, and 0.425 N∙m) |
| Test times | 0~999999 times, can be preset |
| Rally frequency | 1s/time, with tension sensing clip which can verify the tension retention time |
| Torque time | 0-9999.9 seconds, can be preset |
| Equipment size and weight | WDH=650×550×1200mm, approx. 110kg |
IEC 60335-1 Clause 25.15 Cord Anchorage Pull Force And Torque Tester PLC Control
Inquiry Cart
0