IEC 62752 Clause 9.34 Vehicle Drive Over Testing Machine For Plug Or Vehicle Connector Test

IEC 62752 Clause 9.34 Vehicle Drive Over Testing Machine For Plug Or Vehicle Connector Test

Product information:

The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc.

Test principle:

Accessories wired with the minimum size cable of a type recommended by the manufacturer shall be placed on a concrete floor in any normal position of rest. A crushing force of (5000±250) N or (11000±550) N shall be applied by a conventional automotive tire, P225/75R15 or an equivalent tire suitable for the load, mounted on a steel rim and inflated to a pressure of (2.2±0.1) bar. The wheel is to be rolled over the vehicle connector or plug at a speed of (8±2) km/h. The accessory is to be oriented in a natural resting position before applying the force in a different direction for each sample. The accessory under test shall be held or blocked in a fixed position so that it does not move substantially during the application of the applied force. In no case is the force to be applied to the projecting pins.

Applied standard & clauses:

IEC 62196-1: 2022 clause 33.

IEC 62752:2016 clause 9.34.

Structure:

The entire equipment adopts a cold-rolled steel plate protective box structure design. The surface of the box is treated with Teflon paint. The bottom of the box is covered with simulated cement floor. The rolling mechanism can simulate a car tire sliding up and down freely after rolling over an object. The charging pile plug bear the same pressure. The driving device drives the rolling mechanism to achieve forward and backward rolling movements. The main components are made of stainless steel and aluminum parts. Ensure that the tire is rolling over the sample under normal rolling conditions. The main features are as follows:

1. The equipment chassis is equipped with a protective cover to ensure the safety of the test process. The bottom of the box is equipped with shock-absorbing foot pads and a pulley structure for easy installation and disassembly. Guided by heavy-duty slide rails, the roller set slides. The power combined with a high -power motor combined with the turbine reducer, driving the spindle rotation, and the test speed is promoted for crushing test. The specimen fixing device is equipped with an installation fixture for functional box of the specimen to meet standard requirements.

2. The drive over pressure adjustment device is designed with an upper and lower adjustable structure. The tires, upper and lower sliding frames and counterweights borne by the specimen are the total weight of the test.

3. The equipment adopts the working mode of front and rear tire drive: the drive over direction is driven by the forward and reverse rotation of the motor to drive the tire rolling. Keep the specimen stationary. It can simulate the reciprocating rolling of car tires in the most realistic way. Effectively simulate rolling of the specimen.

4. The control system is an independent organization. The host machine is controlled by PLC and operated by touch screen. There are fixed mounting holes and cable openings at the bottom for easy fixing and connection.

Technical Parameters:

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment, automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.