IEC 60068-2-32 Procedure 1 Free Fall Test Machine For Impact Resistance For Packaging Falling

IEC 60068-2-32 Procedure 1 Free Fall Test Machine For Impact Resistance For Packaging Falling

Product information:

Standard: IEC 60335-1 Annex B, IEC 60068-2-32 procedure 1, ISTA, GBT 21599-208, ISO2248, JISZ0202-87, GB/T4857.5-92, etc.

This machine is specially used to test the damage of product packaging caused by falling, and to evaluate the impact resistance during transportation and handling. It can perform free drop tests on the surfaces, corners and edges of packages, and is equipped with a digital height display and a decoder for height tracking. As a result, the drop height of the product can be accurately given, and the error from the preset drop height will not exceed 2% or 10mm.

This machine adopts a single-column structure and has electric reset, electronically controlled drop and electric lifting devices, making it easy to use. The drop height is accurate, the display is intuitive, the drop arm rises and falls smoothly, and the drop angle error is small.

Technical Parameters:

1. Model: Detachable

2. Drop height: 300-1500mm, adjustable

3. Maximum weight measured: 0-65kg

4. Maximum size of test piece: 800 × 800 × 800mm

5. Impact panel size: 1700 × 1200 × 25 (solid iron plate, thickness 25mm)

6. Support arm size: 160 × 180 × 8mm

7. Drop error: <2°

8. Drop height error: ±10mm

9. Control box size: 370 × 350 × 910mm

10. Overall dimensions of the test bench: approximately 1700 × 1200 × 2300mm

11. Equipment weight: about 550kg

12. Power supply: AC220V 50HZ (please confirm the power supply used on site. If you need to change to other voltages, please note the quotation in advance)

13. Power: 1.5KW

Environmental requirements:

1. On-site temperature: 5℃~+28℃ (average temperature within 24 hours ≤28℃);

2. Relative humidity: ≤85%RH;

3. Power supply conditions: single-phase three-wire;

4. Voltage range: AC220V;

5. Allowable frequency fluctuation range: (50±0.5) Hz;

6. The grounding resistance of the protective ground wire is less than 4Ω;

7. The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site, and this switch must be independent for use by the equipment.

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment, automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.