

Add to Cart
Cement Material Universal Industries Bucket Elevator Conveyor
Cement Material Universal Industries Bucket Elevator Conveyor is specially designed for vertical elevating for bulk materials of powders, granular, and small blocks, it adopts belt as the traction part, there are a series of buckets assembled on the belt which loads the materials. The max elevating height of belt bucket elevator is 40 meters.The features of bucket elevator are: simple structure, stable operation, centrifugal discharging. Belt type bucket elevator is widely used in mining, metallurgy, chemicals, power plant, agriculture and quarry industries, and so on.
Main Features
1. Small mechanical size, compared with the same amount of other
kinds of hoist, this hoist mechanical size is small.
2. Large conveying capacity, this series of elevator has more than
NE15~NE800 specifications.Lifting capacity range is 15~800m3/h.
3. Structure port model, high precision.The shell is flanged and
pressed in the middle, and then welded, with good rigidity and
beautiful appearance.
4. Good tightness, less environmental pollution.
5. Easy to operate and maintain with few wearing parts.
6. Low operating cost, very low operating cost due to less energy
saving and maintenance.
7. Reliable operation and advanced design principle ensure the
reliability and good airtightness of the whole machine.Less
environmental pollution.
8. Easy to operate, less maintenance and wearing parts.The
conveying chain is sleeve roller chain, which is used for vertical
lifting of all kinds of powder and lumps.
Advantages
1. Bucket elevator runs smoothly, generally the lifting height is
40m or even higher.
2. Bucket elevator has less requirement on materials, features and
the bulk. It can lift, the powder, granular and bulk materials.
3. The max lifting capacity is 4,600m3/h.
4. Bucket elevator adopts inflow feeding, gravity induced
discharge, and use large capacity hopper.
5. The traction parts adopt wear-resistant chains and steel wire
belt to extend the service life of the traction parts.
Technical data
Model | TD160 | TD250 | TD315 | TD400 | TD500 | TD630 | ||||||||||||||||||
Type of bucket | Q | H | Zd | Sd | Q | H | Zd | Sd | Q | H | Zd | Sd | Q | H | Zd | Sd | Q | H | Zd | Sd | H | Zd | Sd | |
Capacity(m3/h) | 5.4 | 9.6 | 9.6 | 16 | 12 | 22 | 23 | 35 | 17 | 30 | 25 | 40 | 24 | 46 | 41 | 66 | 38 | 70 | 58 | 92 | 85 | 89 | 142 | |
Bucket width(mm) | 160 | 250 | 315 | 400 | 500 | 630 | ||||||||||||||||||
Bucket volume(L) | 0.5 | 0.9 | 1.2 | 1.9 | 1.3 | 2.2 | 3 | 4.6 | 2 | 3.6 | 3.8 | 5.8 | 3.1 | 5.6 | 5.9 | 9.4 | 4.8 | 9 | 9.3 | 15 | 14 | 14.6 | 23.5 | |
Pitch of buckets(mm) | 280 | 350 | 360 | 450 | 400 | 500 | 480 | 560 | 500 | 630 | 710 | |||||||||||||
Belt width(mm) | 200 | 300 | 400 | 500 | 600 | 700 | ||||||||||||||||||
Belt Speed(m/s) | 1.4 | 1.6 | 1.6 | 1.8 | 1.8 | 2 | ||||||||||||||||||
Note: Q: Shallow type, H:arc-shape bottom type, Zd:middle-depth type, Sd: deep type bucket |