

Add to Cart
300TPH RO Water Treatment System For Power Plant Boiler Water Supply
Reverse osmosis system (RO Water Treatment System)is an important
part of water treatment system, which is widely used to produce
pure water and drinking water. It is usually composed of three
parts: raw water pretreatment system, reverse osmosis purification
system and ultra-purification post-treatment system. It is the most
economical and efficient purification method to remove more than
98% ions, organic matter and 100% microorganisms in raw water at
one time (theoretically). Our device can manufacture drinking
water, mineral water, pure water and drinking water sources:
ground, spring, well, river, salt water, lake and so on.
Principle of Ro Water Treatment System
When a pressure greater than the osmotic pressure is applied to the
brine side of the membrane, the direction of water flow is
reversed, and the water in the brine will flow into the freshwater
side, a phenomenon called reverse osmosis.The reverse osmosis
system includes high pressure pump, reverse osmosis membrane
element, pressure vessel (membrane shell), cleaning system and
control instrument.
Technical specification for RO water treatment system
Model | JFRO-300T |
Host Size | 3000x1000x1700mm (can be customized) |
Power | Depends on actual water producing capacity |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 1.2~1.5MPa |
Recovery Rate | 75% |
Designed Water Inlet | 400t/h |
Outlet Flow | 300t/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 8040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 300 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
High Pressure Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP(Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | FRP |
Number of Membrane housing | 50 |
Pipe Material | U-PVC/ Stainless steel (Optional) |
Ro Water Treatment System Flow Chart:
Source water tank → source water booster pump → multi-media filter
→ activated carbon filter → cation resin softener → precision
filter → primary RO reverse osmosis pure water system → secondary
RO reverse osmosis pure water system → water gas mixer →Ozone
sterilizer→Stainless steel pure water tank→Automatic filling line
Excellent Characteristics of Ro Water Treatment System:
1, Reverse Osmosis is a physical method to desalinate and purify
water containing salt under room temperature without phase change.
At present, the desalination rate of ultra-thin composite membrane
elements can reach more than 99.9%, and can simultaneously remove
colloids, organic matter, bacteria, viruses from water;
2, Water purification relies solely on the pressure of the water as
the driving force, and its energy consumption is the lowest among
other water treatment methods;
3; Reverse osmosis can run continuously to produce water, the
system is simple and easy to operate, and the producing water is
stable with good quality;
4, No chemical waste discharge, No waste acid and alkali
neutralization process, no environmental pollution;
5,The reverse osmosis plant is highly automated with less time
spending on operation and maintenance;
6, Compact size requires small space for operation and placement;
7, The removal rate of colloid such as silica and organic matter in
water can reach 99.5%;
8, The reverse osmosis plant can produce water continuously without
any extra operation such as regeneration;
9, It is adapted to the treatment of both brackish water and
seawater, as well as freshwater treatment with low salt content.
Ro Water Treatment System is used in the preparation of space
water, purified water, distilled water, etc. Water for alcohol
manufacture and tempering; Preliminary preparation of water for
pharmaceutical and electronic industries; Chemical process of
concentration, separation, purification and water preparation;
Boiler supply water desalting soft water; Seawater, brackish water
desalination; Water and wastewater treatment in papermaking,
electroplating, printing and dyeing industries.
FAQ:
1. What is the shell film material and specification of ro water
treatment system?
Material of membrane case: stainless steel and fiberglass (FRP)
Specification of membrane shell: four inch membrane shell 4040 (one
core to four core)
8 inch membrane case 8040 (one to seven cores)
Water inlet: end water inlet, side water inlet
2. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
3. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass