

Add to Cart
Ultrafiltration Membrane Water Purification System Ultra Water
Filter Plant
Ultrafiltration system water treatment equipment is one of the most
widely used membrane separation technologies, is a relatively
common membrane type in the current water treatment industry, for
higher water quality requirements of enterprises can basically use
ultrafiltration membrane. Widely used in food and beverage,
chemical electronics, environmental protection biological
engineering and other fields.
The working principle of Ultrafiltration Water Treatment System
In the process of ultrafiltration, the deep liquid flows through
the membrane surface under pressure, and the deep agent (water) and
small molecule solute permeable film smaller than the membrane hole
become the purification liquid (filtration liquid), and the solute
and solute group larger than the membrane hole are trapped and
discharged with the water flow to become the deep shrink liquid.
The ultrafiltration process is dynamic filtration and the
separation is done in flow state. The solute deposits only on the
surface of the membrane, and the ultrafiltration rate attenuates to
a certain extent and tends to equilibrium, which can be recovered
by cleaning.
Technical specifications of Ultrafiltration Water Treatment System
UF System | |
Model | JFUF-40T |
Host Size | can be customized |
Operating Pressure | 0.1-0.3MPa |
Recovery Rate | 85% |
Rack Material | SUS304/Carbon Steel (Optional) |
Pipe Material | U-PVC/ Stainless steel (Optional) |
Ultra-filtration Membrane | PVC/PAN/PVDF (Optional) |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP(Optional) |
Outlet Flow | 40t/h |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Ultrafiltration Water Treatment System Consumables:
1. Sand filter: use 0.5-1 mm sand medium. The filter can be as
small as 200 microns in size. Some large suspended solids such as
suspended solids, rust, mud, impurities, etc. can be trapped by the
medium bed. And removed from the water;
2, activated carbon filter: glass fiber as shell, filled with
activated carbon, remove color, odor, residual chlorine and organic
matter; (Optional shell and stainless steel, carbon steel);
3, micron filter: use 5-20 micron precipitate cartridge filter/bag
filter, remove the suspended solid through the pretreatment. So the
RO entrance is more secure;
4. Ultrafiltration system (ultrafiltration membrane intercepts most
ions. Demineralization/desalination, etc.). The output will be pure
water;
PS: Activated carbon: Replaced approximately every 15 months.
25kg/bag
Working Process of Ultrafiltration Water Treatment System
Raw water+ raw water tank+ raw water pump+ sand filter + carbon
filter+ security filter + UF system+ pure water tank + UV
sterilizer (ozone generation)+ precision filter + water supply
points
Advantages of Ultrafiltration Water Treatment System
1, Ultra-filtration membrane elements are the world's highest
quality organic membrane elements, it can achieve retention
performance and membrane throughput
2, The system has a high recovery rate with excellent product
performance, which can achieve efficient separation, purification
and high-fold concentration.
3, The treatment process has no phase change, no adverse effect on
the constituents of the material, and the separation, purification
and concentration process is always at room temperature, especially
suitable for the treatment of heat-sensitive substances, completely
avoiding the disadvantage of high temperature on the destruction of
bio-active substances, effectively retaining the bio-active
substances and nutrients in the original material system.
4, The system has low energy consumption, short production lead
time, and low operating cost compared with traditional equipment,
which can effectively reduce production cost and improve
efficiency.
5, The system has advanced design, high degree of integration,
small size with compact structure, easy operation and
maintenance,low labor intensity.
6, The control system can be customized according to user's
requirements, combined with advanced control software, on-site
monitoring of key process operating features, to avoid manual
mishandling, multi-faceted to ensure long-term stable operation of
the system.
Ultrafiltration Water Treatment System is often used in the following areas:
(1) Desalination and concentration of macromolecular substances,
and exchange balance of the solvent system of macromolecular
substances.
(2) Fractionation of macromolecular substances.
(3) Depyrogenation treatment of biochemical preparations or other
preparations.
Ultrafiltration technology has become an indispensable and powerful
tool in the fields of pharmaceutical industry, food industry,
electronics industry and environmental protection
Hollow fiber ultrafiltration membrane:
Photos of Ultrafiltration Water Treatment System
FAQ:
1. What are the types of ultrafiltration membranes?
Hollow fiber ultrafiltration membrane, electrophoretic paint ultrafiltration membrane, curtain MBR membrane, plate MBR membrane, tube ultrafiltration membrane
2. What is the operation mode of ultrafiltration membrane?
Operation mode: internal pressure type, external pressure type
3. What is the shell material of the ultrafiltration membrane?
Shell material: ABS, PVC, PMMA, stainless steel