

Add to Cart
Water Desalination Plant Ro Water Treatment Equipment Ro Water
Treatment Plant
Product Introduction of RO Water Treatment System
RO system is widely used in water treatment, purification for tap water, well water, underground water, borehole salty water, brackish water and seawater, pure water and ultra-pure water production. Application area such as, food processing, bottled drinking water, home use drinking water, power stations, electronic industries, cosmetics production, pharmaceuticals manufactories, and medical treatment(such as hemodialysis). It is a key equipment for pure water plant and ultrapure water equipment.
The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to
a pressure of 6-20 kg, the raw water permeates through the reverse
osmosis membrane with a pore size of only 0.0001 microns under the
action of pressure. Chemical ions, bacteria, fungi, and virions
cannot pass through, and are discharged with wastewater. Only water
molecules and solvents with a volume of less than 0.0001 microns
are allowed to pass through.
Technical Specifications of RO Water Treatment System
5000LPH Reverse Osmosis System | |
Model | JFRO-5000L |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
High Pressure Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP(Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP |
Pipe Material | U-PVC/ Stainless steel (Optional) |
Advantages of RO water treatment system:
(1) pressure is the main force in RO separation process, which does
not go through the phase transition of energy intensive exchange
and has low energy consumption; (2) RO does not need a lot of
precipitants and adsorbents, and its operating cost is low; (3) RO
separation engineering is simple in design and operation and short
in construction period; (4) RO purification efficiency is high and
environmentally friendly. Therefore, RO technology has been widely
used in domestic and industrial water treatment, such as
desalination of seawater and brackish water, production of medical
and industrial water, preparation of pure and ultra-pure water,
industrial wastewater treatment, food processing concentration, gas
separation, etc.
Process flow of RO Water Treatment System
Raw water pump→ mechanical filter(quartz sand filter)→ activated
carbon filter→ Water softener filter→security filter→ high pressure
pump →reverse osmosis system
1. Water tank: storage of tap water, to solve the problem of
insufficient tap water pressure and the back booster pump due to
the impact of insufficient water, reduce the failure rate
2. Booster pump: equipped with a stainless steel pump, to provide
sufficient pressure for subsequent filtration
3. Quartz sand filter: mainly remove the mud, suspended solids and
large particles in the tap water
4. Carbon filter: mainly remove organic substances, residual
chlorine and odor in tap water
5. Water softener filter: mainly remove the calcium and magnesium
in tap water, reduce the hardness of water
6. Security filter: further filtration, protection of reverse
osmosis membrane
7. High pressure pump: provide enough pressure for reverse osmosis
system
8. Reverse osmosis unit: the core part of pure water equipment, the
production of high-purity water.
9. Pure water tank: storage pure water, can change the size of the
water tank,after the below process,The water result is pure enough
for different application.
Photos of reverse osmosis water treatment system
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.