

Add to Cart
1000L/H Double Stage Ro Water Purification Machine For Food
Production Use
Reverse osmosis membrane
Ordinary water treatment with reverse osmosis membrane temperature
is 0 ~ 45℃, but in the need of 90℃ high temperature sterilization
special occasions, can use high temperature resistance, chemical
resistance of reverse osmosis membrane. In addition, a variety of
food grade or sanitary grade reverse osmosis membranes with special
membrane element structures have also begun to be used.
Working Principle of Reverse Osmosis Water Treatment System:
When a pressure greater than osmotic pressure is applied on the
saltwater side of the membrane, the flow of water is reversed and
the water in the saltwater flows into the fresh side, a phenomenon
called reverse osmosis.
Technical Specifications of Reverse Osmosis Water Treatment System:
1m³/h Reverse Osmosis System | |
Model | JFRO-1000L |
Host Size | 1000x600x1600mm (can be customized) |
Power | 2.2KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 0.8-1.2MPa |
Recovery Rate | 50% |
Designed Water Inlet | 2000L/h |
Outlet Flow | 1000L/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 4040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 4 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
High Pressure Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP(Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP |
Pipe Material | U-PVC/ Stainless steel (Optional) |
Process flow of reverse osmosis water treatment system:
Raw water → original water tank → original water pump → multi-media
filter (quartz sand filter)→ activated carbon filter → soft water
processor → precision filter → high pressure pump → first stage
reverse osmosis (RO) device → pure water tank → high pressure pump
→ second stage reverse osmosis → ultraviolet sterilization device →
water point
Application of reverse osmosis membrane:
The largest field of reverse osmosis membrane industry application
is still large boiler supply water, a variety of industrial pure
water, drinking water market size next, electronics, semiconductor,
pharmaceutical, medical, food, beverage, wine, chemical,
environmental protection, metallurgy, textile and other industries
have also formed a certain scale of membrane application. The
potential application areas in the future are sewage treatment of
cooling circulating water in power plants, large-scale seawater
desalination, brackish water desalination, large-scale municipal
and industrial wastewater treatment, etc.
FAQ:
1, What are the inlet water quality requirements for ro water
treatment system membrane components?
| NTU | SDI | Residual chlorine(mg/L) | Fe2+(mg/L) | TOC(mg/L) |
Limits | ≤1 | ≤5 | ≤4 | ≤3 |
2. What is the material of ro water treatment system membrane?
Acetate membrane (CA) : mainly because of its resistance to
chlorine, so it is still durable. But its suitable pH range is
small, easy hydrolysis
Aromatic polyamide membrane (PA) : water almost can not have
chlorine, only through a variety of pretreatment chlorine.
3. RO water treatment system configuration:
First-stage multi-stage process: if the recovery rate is not
achieved in the first stage (50-65% in the first stage and 65-75%
in the second stage), the multi-stage tandem filtration can be
used. The effective cross-sectional area of each segment decreases.
2:2 and 2:3 and 4:2:1
Multi-stage process: when the first stage process cannot meet the
effluent quality requirements (the first stage is generally
≤20μs/cm), the product water of the first stage process is sent to
another reverse osmosis unit.
The arrangement of membrane components can be divided into series
and parallel.