

Add to Cart
Reverse Osmosis Water Filter System Industrial Ro Plant
Desalination Plant
Product Introduction of RO Water Treatment System
Design Features:
1. Achieve deep filtration of water by increasing the pressure on
water. In addition to general filters, reverse osmosis pure water
equipment also has fine filters, granular activated carbon filters
and compressed activated carbon filters. The fine filter has a
finer filtering function than the general filter, and can better
filter impurities in the water. As we know, activated carbon has a
good adsorption and filtration function for odors and impurities.
The reverse osmosis pure water equipment uses double activated
carbon filters to realize the deep filtration of raw water and
improve the filtration efficiency of the equipment. At the same
time, it is also an innovation to enhance the filtration capacity
by increasing the pressure of the water.
2. The core of reverse osmosis pure water equipment is the
application of reverse osmosis membrane. The reverse osmosis
membrane is a filter membrane with extremely small pore size. Using
this membrane can realize ultra-fine filtration of raw water, and
can divide water into high concentration and low concentration at
the same time. Water with a higher concentration can be recycled
and reused, and water with a lower concentration is pure water that
can be used by humans.
Advantages of RO water treatment system:
Technical Features:
1. American ultra-low pressure roll-type composite reverse osmosis
membrane with high desalination rate and low operating pressure,
excellent water quality, low operating cost and long service life;
2. High-efficiency, low-noise, high-quality high-pressure pumps;
3. The online product water conductivity meter can monitor the
water quality at any time;
4. The product water and concentrated water are equipped with flow
meters to monitor the water output and recovery rate of the system;
5. Pressure gauges before and after the fine filter, and pressure
gauges before and after the reverse osmosis membrane can
continuously monitor the pressure difference between the reverse
osmosis membrane and the fine filter, prompting when to clean or
replace;
6. The high pressure switch protects the reverse osmosis membrane
from damage due to excessive pressure;
7. The low-pressure switch protects the high-pressure pump from
damage due to water supply stop;
8. The stainless steel regulating valve adjusts the water output
and the system recovery rate at any time;
9. The standard program automatic control system can reduce the
membrane fouling speed, prolong the service life of the membrane,
and ensure the stable and reliable water quality of the system
effluent.
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter
(quartz sand filter) → Activated carbon filter → Soft water
processor → Precision filter → High pressure pump → Primary reverse
osmosis (RO) device → Purified water tank → High pressure pump →
Two Stage reverse osmosis → ultraviolet sterilization device →
water point.
Photos of Reverse Osmosis Water Treatment System
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.