Add to Cart
Drinking Water Purification System Reverse Osmosis Process
Product Introduction
The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to
a pressure of 6-20 kg, the raw water permeates through the reverse
osmosis membrane with a pore size of only 0.0001 microns under the
action of pressure. Chemical ions, bacteria, fungi, and virions
cannot pass through, and are discharged with wastewater. Only water
molecules and solvents with a volume of less than 0.0001 microns
are allowed to pass through.
Technical Specifications of RO Water Treatment System
2000LPH Reverse Osmosis System | |
Model | JFRO-2000L |
Host Size | 2700x600x1600mm (can be customized) |
Power | 3KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 0.8-1.2MPa |
Recovery Rate | 67% |
Designed Water Inlet | 3000L/h |
Outlet Flow | 2000L/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 4040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 8 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
High Pressure Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP(Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP |
Number of Membrane housing | 4 |
Pipe Material | U-PVC/ Stainless steel (Optional) |
Advantages of RO water treatment system:
(1) pressure is the main force in RO separation process, which does
not go through the phase transition of energy intensive exchange
and has low energy consumption; (2) RO does not need a lot of
precipitants and adsorbents, and its operating cost is low; (3) RO
separation engineering is simple in design and operation and short
in construction period; (4) RO purification efficiency is high and
environmentally friendly. Therefore, RO technology has been widely
used in domestic and industrial water treatment, such as
desalination of seawater and brackish water, production of medical
and industrial water, preparation of pure and ultra-pure water,
industrial wastewater treatment, food processing concentration, gas
separation, etc.
Process flow of RO Water Treatment System
Raw water pump→ mechanical filter(quartz sand filter)→ activated
carbon filter→ Water softener filter→security filter→ high pressure
pump →reverse osmosis system
1. Water tank: storage of tap water, to solve the problem of
insufficient tap water pressure and the back booster pump due to
the impact of insufficient water, reduce the failure rate
2. Booster pump: equipped with a stainless steel pump, to provide
sufficient pressure for subsequent filtration
3. Quartz sand filter: mainly remove the mud, suspended solids and
large particles in the tap water
4. Carbon filter: mainly remove organic substances, residual
chlorine and odor in tap water
5. Water softener filter: mainly remove the calcium and magnesium
in tap water, reduce the hardness of water
6. Security filter: further filtration, protection of reverse
osmosis membrane
7. High pressure pump: provide enough pressure for reverse osmosis
system
8. Reverse osmosis unit: the core part of pure water equipment, the
production of high-purity water.
9. Pure water tank: storage pure water, can change the size of the
water tank,after the below process,The water result is pure enough
for different application.
Photos of reverse osmosis water treatment system
Application of reverse osmosis water treatment equipment
Accessories Details Display
Consumable Replacement
Similar products you may be interested in
About Jufu Water Technology
Jufu Water Tech is a Hi-tech enterprise which specialized in
integrating Research & Development, Manufacturing, Sales,
Engineering installation and Consulting on water treatment and
water purification equipment and technologies.
Jufu has strong power on know-how solution providing. The water
business including water and wastewater treatment equipment supply,
industrial process water, recycling and reuse solutions.
The main category of the products not limited to:
Ultrafiltration equipment, Nano-filtration equipment, Reverse
osmosis equipment, EDI electric desalination equipment, Direct
piped drinking water equipment, Medical purified water equipment, Water softening equipment, MBR integrated wastewater treatment equipment, Waste permeates treatment equipment.
Jufu Water Tech has supplied our water purification and water
treatment equipment products and service to more than 30 provincial
and cities in China domestic market based on our reliable quality,
reasonable price and perfect after-sales service network. With the aim of "Water Treatment Equipment Expert Worldwide!", Jufu
has successfully promoted its product into the global Water
purification and water treatment field. Right now products from
Jufu has successfully access to Southeast Asia, Middle East, South
American and Africa market.
In the future, Jufu will continue to move forward with relentless
efforts, and actively advocate "Safe, Clean and Pure" to achieve business vision of being a Top-class Water purification
and water treatment products manufacturer, and an excellent Water
engineering service provider!
Project display
Our Suppliers
Packaging and Shipping
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.