Add to Cart
1000LPH Purification Plant RO System Industrial Ro Plant
Product Introduction of RO Water Treatment System
Application Status of Reverse Osmosis Membrane
Among various membrane separation technologies, reverse osmosis
technology is the most successful, fastest-growing and most widely
used in China in recent years. It is estimated that since 1995, the
use of reverse osmosis membranes has increased by an average of 20%
per year; according to conservative statistics, the market supply
of industrial reverse osmosis membrane elements in 1999 was 6,000
pieces of 8-inch membranes and 26,000 pieces of 4-inch membranes.
The market in 2012 was stronger, and the membrane consumption
increased significantly year by year. It is estimated that the
application of reverse osmosis technology has created an annual
output value of more than 1 billion yuan in the water treatment
industry. The largest application field of reverse osmosis membrane
industry in China is still large-scale boiler supply water and
various industrial pure water, followed by the market scale of
drinking water, electronics, semiconductor, pharmaceutical,
medical, food, beverage, wine, chemical industry, environmental
protection and other industries The application has also formed a
certain scale.
The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to
a pressure of 6-20 kg, the raw water permeates through the reverse
osmosis membrane with a pore size of only 0.0001 microns under the
action of pressure. Chemical ions, bacteria, fungi, and virions
cannot pass through, and are discharged with wastewater. Only water
molecules and solvents with a volume of less than 0.0001 microns
are allowed to pass through.
Technical Specifications of RO Water Treatment System
1000LPH Reverse Osmosis System | |
Model | JFRO-1000L |
Host Size | 1000x600x1600mm (can be customized) |
Power | 2.2KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 0.8-1.2MPa |
Recovery Rate | 50% |
Designed Water Inlet | 2000L/h |
Outlet Flow | 1000L/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 4040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 4 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP (Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP (Optional) |
Pipe Material | U-PVC, Stainless steel (Optional) |
Advantages of RO water treatment system:
Reverse osmosis equipment belongs to physical desalting method,
which has many advantages.
1) Non-phase-change physical method was used to desalinate and
purify the saline water under norma temperature.
2) Desalting rate of single membrane element is 99.3% and can
remove colloid, organics, bacteria, virus and all kinds of heavy
metals in water at the same time.
3) With water pressure as the driving force, energy consumption is
the lowest among many treatment methods.
4) No need for large amount of chemical treatment, no elimination
of chemical waste liquid, no environmental pollution, and the
recovery rate is over 70%.
5) High automation program, automatic stop in case of ailure, with
automatic protection function.
6) The system is simple, easy to operate, and the water quality is
stable.
7) Equipment covers small area, compact structure, reliable
operation and high water quality.
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter
(quartz sand filter) → Activated carbon filter → Soft water
processor → Precision filter → High pressure pump → Primary reverse
osmosis (RO) device → Purified water tank → High pressure pump →
Two Stage reverse osmosis → ultraviolet sterilization device →
water point.
Photos of Reverse Osmosis Water Treatment System
Demonstration of the application of reverse osmosis system
Replacement of consumables
Products you may be interested in
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.