BTPS Hydraulic Directional Control Solenoid Valve 4WE Series 4WE6 4WE6D 4WE6D62 EG24N9K4 R900561274 Hydraulic Valve
Brand Name:BTPS/Rexroth
Model Number:4WE6D62_EG24N99K4
Minimum Order Quantity:5
Delivery Time:5 work days
Payment Terms:T/T
Certifiion:ISO 9001
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou China
Address:
Room 301-2295, Building 6, Kelin Road, Tianhe District, Guangzhou
Supplier`s last login times:
within 33 hours
Product Details
Company Profile
Product Details
BTPS Hydraulic Directional Control Solenoid valve 4WE series 4WE6 4WE6D 4WE6D62/EG24N9K4 R900561274 hydraulic valve
Factory sale Rexroth Valves 4WE6A 4WE6B 4WE6C 4WE6D 4WE6E 4WE6F 4WE6J 4WE6H 4WE6G 4WE6L 4WE6M 4WE6 4WE10 Hydraulic Valve
Parameter | Data | ||
Weight | Valve with a coil(kg) | Single connection | Centering connection |
3.9 | 4.0 | ||
Valve with two coils(kg) | 5.5 | 5.6 | |
Installation loion | Arbitrary | ||
Ambient temperature range | Standard model (℃) | -20⋯+70(NBR seal) -15⋯+70 (FKM seal) | |
Models suitable for HFC hydraulic oil(℃) | -20⋯+50 | ||
Low temperature model(℃) | -40⋯+50 | ||
Storage temperature range(℃) | -20⋯+50 | ||
Maximum operating pressure | Port A, B, P(bar) | 350 | |
Port T(bar) | 210 | ||
Maximum flow(l/min) | 160 | ||
Hydraulic oil temperature range (at the valve working port)(℃) | –20 … +80 (NBR seal) | ||
–15 … +80 (FKM seal) | |||
–20 … +50(HFC hydraulic oil) | |||
–40 … +50(Low temperature model) | |||
Viscosity range(mm2/s) | 2.8 … 500 | ||
Rexroth hydraulic valve
A hydraulic valve is an automation component operated by pressure
oil. It is controlled by a pressure distribution valve and
pressure oil. It is usually used in combination with an electromagnetic pressure distribution valve. It can be used to remotely
control the on and off of the oil, gas, and water pipeline systems of hydropower stations. Commonly used for clamping, control,lubriion and other oil circuits. There are direct-acting type and pilot type, and the pilot type is mostly used.
pressure oil. It is usually used in combination with an electromagnetic pressure distribution valve. It can be used to remotely
control the on and off of the oil, gas, and water pipeline systems of hydropower stations. Commonly used for clamping, control,lubriion and other oil circuits. There are direct-acting type and pilot type, and the pilot type is mostly used.
Hydraulic valve design principle
The design of the hydraulic valve is mainly for the design of the
hydraulic valve group, and the oil circuit must be considered
before the design of the hydraulic valve group. It is necessary to
determine in advance which parts of the oil circuit can be
integrated. The design of the oil circuit must be simple and save
Go unnecessary steps. After determining the oil circuit, the main
thing is the oblique hole and the process hole. These things in the
oil path should be reduced. As long as it is enough, it
is not necessary too much. Pay attention to the hole diameter in the design of the oblique hole and the process hole.
is not necessary too much. Pay attention to the hole diameter in the design of the oblique hole and the process hole.
Collecting valve | Proportional valve | Maintaining valve |
Throttle valve | Relief valve | Solenoid directional valve |
Speed regulation valve | Pressure reducing valve | Manual reversing valve |
Drive valve | Pressure valve | Check valve |
Flow valve | Cartridge valve | Hydraulic control one-way valve |
Collecting valve | Stop valve | Solenoid valve |
Pilot valve | Reverse check valve | Superposition valve |
Direct acting relief valve | Pilot check valve | Directional valve |
Pilot relief valve | Sequence valve | Pilot sequence valve |
Pilot reducing valve | Balance valve | Direct acting sequence valve |
BTPS Hydraulic Directional Control Solenoid Valve 4WE Series 4WE6 4WE6D 4WE6D62 EG24N9K4 R900561274 Hydraulic Valve
Inquiry Cart
0