

Add to Cart
Vacuum Chamber Helium Leak Detecting System Used in Electricity Industry
Product Introduction
Motor Power: 600 W
Ultimate pressure: 1000 Pa
German original molecular pump, double-iridium with ion source;
Unique air circuit design, low particulate interference;
Self-protection function to prevent background contamination;
Automatic evacuation pressure and time setting for high leak detection efficiency;
Mobile cart, low moving noise
With fault prompt and alarm function;
Optional wireless remote control.
This equipment is suitable for leakage detection of high-voltage
switchgears. It can be equipped with a material handling system to
realize automatic in-and-out chamber, and reduce labor intensity.
It can effectively control the internal-external pressure
difference of the workpiece to ensure that the workpiece will not
be damaged due to the pressure difference exceeding the limit. The
helium recovery system can realize helium recycling, which can
greatly reduce the use-cost. The remote monitoring function is
optional.
Product Performance
1. The size of vacuum chamber can be customized according to the
size of workpiece; the equipment size and layout can be customized
according to the workshop;
2. It is equipped with a left-right sliding door and a platform
outside the chamber, so that workpieces can get in and out of the
chamber smoothly and conveniently;
3. There are several independent joints reserved in the chamber, so
multiple workpieces can be detected at the same time;
4. The helium can be recycled, with a recovery rate as high as 96%,
which can reduce the use-cost;
5. High-end configuration, standardized design and production, and
stable and reliable performance;
Product Application
Power switchgear, ring main unit, pole top switch, power castings
Product Parameter
Number of vacuum chammbers | 1~6 |
Number of test pieces per chammber | 1~6 |
Vacuum chamber volume | 0.1-10000L, Accept Customized |
Testing pressure | ≤35Mpa |
Detector leakge rate | 1*10-4-1*10-9 Pa.m3/s |
ecycling efficiency | ≤98% |
Vacuum chammber evacuation pressure | ≤30Pa |