Automotive EMC Test Chamber Electric Vehicle ESA Electro Magnetic Compatibility
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN661-EVESA
Minimum Order Quantity:1
Delivery Time:6 months
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
EMC Test Solution for Automotive ESA Electric Vehicle Testing Equipment
Complied Standards & Clauses
UN ECE R10 "Uniform Provisions Concerning the Approval of Vehicles with Regard to Electromagnetic Compatibility"
EN 55025/CISPR 25 "Vehicles, boats and internal combustion engines-
Radio disturbance characteristics- Limits and methods of
measurement for the protection of on-board receivers"
CISPR 12 "Vehicles, boats and internal combustion engines - Radio
disturbance characteristics - Limits and methods of measurement for
the protection of off-board receivers"
ISO 11452 "Road vehicles-Component test methods for electrical
dusturbances from narrowband radiated electromagnetic energy"
ISO 10605 "Road vehicles — Test methods for electrical disturbances
from electrostatic discharge"
SAE J1113 "Electromagentic Compatibility Measurement Procedure and
Limits for Vehicle Components (Except Aircraft) (60Hz to 18GHz)"
EN 50498 "Electromagnetic compatibility (EMC)-Product family
standard for aftermarket electronic equipment in vehicles"
EN301489-1: "ElectroMagnetic Compatibility (EMC) standard for radio
equipment and services; Part 1: Common technical requirements"
EN55032: " Electromagnetic compatibility of multimedia equipment -
Emission requirements"
IEC 61000-3-2: "Electromagnetic compatibility limits for harmonic
current emissions (equipment input current ≤16A)"
IEC 61000-3-3: "Electromagnetic compatibility limits the voltage
variation produced with rated current ≤16A and unconditional access
of the device in public low-voltage power supply system, voltage
fluctuations and flicker limits"
......
System Overview
The whole test system includes EMI test project and EMS test project shown as following:
- EMI test project
| Test items | Test content | Test site |
| Conduction Emission | 150kHz-30MHz, QP / AV | Shielded room |
| Radiated Emission | 30MHz-6GHz, QP / AV | Shielded room |
| Harmonic current emissions | According to IEC61000-3-2 | Ordinary laboratory |
| Voltage fluctuations and flicker | According to IEC61000-3-3 | Ordinary laboratory |
- EMS test project
| Test items | Test content | Test site |
| ESD test | According to IEC61000-4-2 | Ordinary laboratory |
| EFT test | According to IEC61000-4-4 | Ordinary laboratory |
| Conducted RF immunity | According to IEC61000-4-6 | Shielded room |
| RF radiated immunity test | According to IEC61000-4-3 | chamber |
| Surge immunity test | According to IEC61000-4-5 | Ordinary laboratory |
| Voltage dips, short interruptions and voltage variations immunity | According to IEC61000-4-11 | Ordinary laboratory |
ISO 7637 test Automotive Electronics Test Project (For Automotive parts) | According to ISO 7637 pulses 1, 2a, 2b, 3a, 3b, and 4 | Ordinary laboratory |
The system consists of an SAC, a control room and an amplifier room:
| NO. | Item | Specification (outer size) | QTY |
| 1 | Anechoic Chamber | 9.2 × 6.2× 6.2m (L × W × H) (Adjustment is according to the structural of the building, cost will be different) | 1 |
| 2 | Control Room | 3.0 × 3.0 × 3.0m (L × W × H) (Adjustment is according to the structural of the building, cost will be different) | 1 |
| 3 | Amplifier Room | 2.0 × 3.0 × 3.0m (L × W × H) (Adjustment is according to the structural of the building, cost will be different) | 1 |
Details
Automotive EMC Test Chamber Electric Vehicle ESA Electro Magnetic Compatibility
Inquiry Cart
0