IEC60068-2-1 Temperature and Humidity Testing Chamber 1200L
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN881-1200L
Minimum Order Quantity:1
Delivery Time:30 Days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
IEC60068-2-1 Temperature and Humidity Testing Chamber 1200L
Complied Standards & Clauses
Conforms to IEC60068-2-1, IEC60068-2-2,IEC60068-2-78, IEC60068-2-30,etc.
Product Overview
This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical appliances, plastics, etc. The purpose is to confirm the products reliability of storage and transportation under high and low temperature alternating heat and humidity.
Technical Parameters
| Technical Parameters | ||
| Control & Operation | PLC and touch screen intelligent control system | |
Chamber Size | Inner Size | External Size |
| 1200*1000*1000 mm | 1480*2150*1520 mm | |
| Temperature Range | -40 °C ~+150°C | |
| Humidity Range | 20%～98%RH | |
| Temperature fluctuation | ±0.5℃ | |
| Humidity fluctuation | ≤2.5% | |
| Temperature deviation | ≤±2.0℃ | |
| Humidity Deviation | ≤±3% | |
| Heating Rate | ≧2-3°C/min | |
| Cooling Rate | ≧1°C/min, average no load | |
| Load condition | None | |
| Working noise | A sound level≤70dB(A) (Measured in a soundproof room with an ambient temperature of 25°C and low echo. Using A weighting, test the average of 9 points. Each test point is 1 meter away from the noise source horizontally and 1 meter above the ground.) | |
| Temperature and Humidity Range Scheme | ||
| Structural features | ||
| Insulation enclosure structure | 1. Outer wall material: A3 board spraying. 2. Inner wall material: brushed stainless steel plate SUS﹟304. 3. Chamber thermal insulation material: 100mm high temperature resistant rigid polyurethane foam. 4. Chamber door insulation material: 100mm high temperature resistant rigid polyurethane foam. | |
| Bottom structure strength | The weight capacity of the track at the bottom of the test chamber: ≤100Kg/m² (load) | |
| Air conditioning channel | 1. Stainless steel long-axis centrifugal fans: 2 sets/90W. 2. Fan, heater, evaporator (also dehumidifier), drainage device, pressure balance port, adjustable air deflector, temperature sensor | |
| Standard configuration of test chamber | 1. Observation window: 400x600x40mm 3-layer vacuum tempered glass 2. Flat embedded handles 3. Door hinges: SUS #304 imported hinges 4. Energy-saving lamp inside the chamber 5. Lead hole: φ50mm 1 piece | |
| Chamber door | 1. Double doors open outwards, with hinges on the left and right sides and a handle in the middle (when facing the front of the box). 2. Equipped with a safety door locking mechanism (the door can be opened in the test room), the door is equipped with electric heat to prevent condensation, and the visible range of the insulating glass observation window (W400×H600mm). The door frame is equipped with an anti-condensation electric heating device. | |
| Control panel | Controller 7-inch display screen, temperature (humidity) control display screen, operating indicator light, and lighting button. | |
| Mechanical room | Refrigeration unit, compressor water tray, pressure relief device, heating device | |
| Power distribution cabinet | Distribution board, cooling fan, main power switch, transformer, intermediate relay, time relay, solid-state relay, AC contactor, circuit breaker | |
| Heater | 1. Fin-type radiator-shaped stainless steel electric heater 2. Heating control method: SSR (Solid State Relay) non-contact equal period pulse width modulation 3. Heating power: approximately 3KW | |
| Power cable hole | Located on the back of the chamber | |
Details
IEC60068-2-1 Temperature and Humidity Testing Chamber 1200L
Inquiry Cart
0