AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment

AIS 038 Battery Crush and Nail Penetration Test Chamber EV Battery Testing Equipment

Complied Standards & Clauses

Conforms to AIS 038 crush test in page no. 79 of 106 cl.no. 3.2, Nail penetration test in page no. 101 of 106 cl.no. 3.3.2 (a)

IEC62133-2012, IS0 12405-4:2018, etc

Equipment Overview

Environmental Requirements:

1. Main power leakage circuit breaker: AC380(1±10%)V (50±0.5)Hz three-phase four-wire + protective ground wire. Install 10㎡ wire, 3P 63A leakage protection switch

2. Power cable: one five-core cable (four-core cable + protective ground wire), about 3 meters long (outside the box)

3. Installation site:

① The ground is flat and well-ventilated;

② No strong vibration around the equipment;

③ No strong electromagnetic field around the equipment;

④ No flammable, explosive, corrosive substances and dust around the equipment;

⑤ Avoid direct sunlight or high temperature and humidity;

⑥ The ground load-bearing capacity of the site: not less than 650kg/m2 (prerequisite: the channel size around the equipment is ≥ 600 mm; the load weight is ≤ 500kg);

⑦ There is appropriate space for use and maintenance around the equipment:

⑧ There should be space around the equipment for at least one person to pass through, i.e. ≥600mm;

⑨ There should be space for the equipment door to open and close normally. And there should be no other objects in front of the equipment door.

4. Environmental conditions: Temperature: 20℃±5℃; Relative humidity: ≤85%RH; Atmospheric pressure: 80kPa～106kPa

Technical Parameters

Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle test equipment, battery testing equipment, electromagnetic compatibility (EMC) test system, environmental testing equipment, fire retardant test equipment, dust-proof waterproof testing equipment and electrical appliances testing equipment. Our products covering electrical vehicle, electric power, communication, electrical appliances and electronic devices industries.

Sinuo has a professional technical research and development team, which is proficient in various international standards such AS IEC, ISO, EN, VDE, BS, AS, ASTM, GB and industry standards such AS MBN LV124, VW-80000. We master physical mechanics, heat, electricity, fluid and other theoretical knowledge in the application of equipment. And continue to focus on industry standard equipment performance optimization, operation simplification and equipment stability and reliability improvement.

Sinuo has two factories in Guangzhou and Dongguan, and cooperates with many research institutions and schools. Our R&D and production capacity are in the forefront. We have authorized agents in South Korea, the United States, South Africa, Egypt, Pakistan, the Philippines and other places, we serve customers BV, CSA, Intertek, SGS, TUV and other internationally renowned testing and certification institutions, local government quality inspection departments and production factories.