Rubber o ring seal making machine/rubber vulcanizing press/o ring vulcanizing machine

Rubber o ring seal making machine/rubber vulcanizing press/o ring vulcanizing machine

Fulund has a long history since its establishment in 1999. Due to the needs of development, the original brand (TYL) expanded the new brand Fulund in 2022 . Fulund has customers all over the world,such as international brands shoe manufacturer.

Fulund mainly produces: Hot label machine, foam cutting machine, insole hot stamping machine, shoe tongue transfer hot stamping machine, insole heat transfer machine, insole cutting and transfer integrated machine, insole printing machine, silk screen printing machine, embossing machine, soft rubber equipment , vacuum vulcanizing machine, silicone labeling machine, glue dispensing machine, etc.

Equipment use conditions and requirements:

1. The machine has the functions of automatic control of rising, automatic constant temperature, automatic pressure holding, vulcanization timing, time alarm, manual mold opening and lowering;

2. The equipment pipes are connected by seamless steel pipes, which are pressure-resistant and oil-resistant, and do not produce noise when working;

3. The entire hydraulic oil circuit system adopts advanced welding technology and sealing measures, so there will be no oil leakage or oil leakage, and no crawling or shaking during the pressurization process;

4. The equipment has an automatic pressure compensation function when the equipment is locked to ensure that the pressure drop does not exceed 10% during the pressure holding process within one hour;

5. After the equipment clamping action is completed, high-pressure mold clamping is performed immediately at an appropriate speed. After clamping the mold, it can be vented at will. The number of vents and the time of venting are realized manually. After the deflation action is completed, immediately transfer to the state of the pressure-holding vulcanizer.

6. The hydraulic control system of the machine is controlled by a manual valve, and the template can stay at any position during the mold clamping process.

7. The equipment has adjustable process parameters, such as: curing time (99 minutes 59 seconds), curing temperature (0-200°C) arbitrarily adjusted settings.