Allow the test, urine specimen, and/or controls to reach room
temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove
the test cassette from the sealed pouch and use it within one hour.
2. Place the test cassette on a clean and level surface. Hold the
dropper vertically and transfer 3 full drops of urine (approx.
120μL) to the specimen well (S) of the test cassette, and then
start the timer. Avoid trapping air bubbles in the specimen well
(S). See the illustration below.
3. Read the adulteration strips and Alcohol strip between 3-5
minutes according to color chart provided separately/on foil pouch.
Refer to your Drug Free Policy for guidelines on adulterated
specimens. We recommend not to interpret the drug test results and
either retest the urine or collect another specimen in case of any
positive result for any adulteration test.
4. The drug strip result should be read at 5 minutes. Do not
interpret the result after 10 minutes.
Fast Reading Multi-Drug Rapid Test Cassette A- Oral Fluid Drug
Abuse Diagnosis With CE And High Sensitivity
Application And Description:
The Multi-Drug Rapid Test Cup for AMP/ MET/ COC/ OPI/ THC/ PCP/
MTD/ MD/MA/ BZO/OXY/ COT/ K2/ KET/ BAR/ BUP/ 6-MAM/ TML/ FYL/CFYL/
MD/PV/ α-PVP/ ALC and their metabolites is a rapid, oral fluid
screening test that can be performed without the use of an
instrument. The test utilizes monoclonal antibodies to selectively
detect elevated levels of specific drugs in human oral fluid.
How to use?
Allow the test Cassette, specimen, and/or controls to reach room
temperature (15-30°C) prior to testing. Instruct the donor to not
place anything in the mouth including food, drink, gum or tobacco
products for at least 10 minutes prior to collection.
1. Bring the pouch to room temperature before opening it. Remove
the test from the sealed pouch and use it within one hour.
2. Remove the collector from the sealed pouch and insert the sponge
end of the collector into the mouth. Actively swab the inside of
the mouth and tongue to collect oral fluid for a total of 3 minutes
until the sponge becomes fully saturated. Gentle pressing the
sponge between the tongue and teeth will assist saturation. No hard
spots should be felt on the sponge when saturated.
3. Remove the collector from the mouth. Place saturated oral fluid
collector into collection tube and press sponge fully against the
strainer to collect oral fluid. Discard the collector. Snap the cap
shut on the Collection tube.
4. Place the test cassette on a clean and level surface. Unscrew
cap cover from the Collection tube. Invert the Collection tube and
transfer 3 drops of oral fluid (approximately 120 µL) into specimen
well of the test cassette and start the timer. Avoid trapping air
bubbles in the specimen well. Place screw cap on the collection
tube. See illustration below.
5. Wait for the colored line(s) to appear. Read drug strip results
at 10 minutes. Do not read results after 1 hour.
6. Read Alcohol strip result at 3-5 minutes. Compare the color of
the reaction pad with the color chart provided separately/on foil
to determine the relative alcohol level.
7. Apply the security seal over screw cap and send to the
laboratory for confirmation if necessary.
Order Information
Cat. No. | Product | Specimen | Pack |
DOA-125~1175 | Multi-Drug 2~17 Drugs Rapid Test Cassette | Urine | 25 T |
DSD-825~895-A | Multi-Drug 2~9 Drugs Test Cassette | Oral Fluid | 25 T |
DSD-825~885-B | Multi-Drug 2~8 Drugs Test Cassette | Oral Fluid | 25 T |
DOA-425~4175 | Multi-drug 2~17 drugs Rapid Test Cassette | WB/S/P | 25 T |
DOA-H925~H9145 | Multi-drug 2~14 drugs Rapid Test Cassette | Hair | 10 T |